华西口腔医学杂志 ›› 2025, Vol. 43 ›› Issue (1): 114-125.doi: 10.7518/hxkq.2024.2024169
褚天昊1,2(), 张雪颖1, 王浩丞1, 马浩杰1, 刘媛媛1,2(
)
收稿日期:
2024-05-02
修回日期:
2024-08-05
出版日期:
2025-02-01
发布日期:
2025-01-22
通讯作者:
刘媛媛
E-mail:1072615131@qq.com;liuyuan113@sina.com
作者简介:
褚天昊,住院医师,硕士,E-mail:基金资助:
Chu Tianhao1,2(), Zhang Xueying1, Wang Haocheng1, Ma Haojie1, Liu Yuanyuan1,2(
)
Received:
2024-05-02
Revised:
2024-08-05
Online:
2025-02-01
Published:
2025-01-22
Contact:
Liu Yuanyuan
E-mail:1072615131@qq.com;liuyuan113@sina.com
Supported by:
摘要:
目的 通过测量单、双侧磨牙正锁患者的双侧颞下颌关节的形态及位置并模拟咬合时下颌骨受力变形情况,旨在为单、双侧磨牙正锁
患者的颞下颌关节紊乱病的诊断提供依据。 方法 本研究为回顾性研究,根据纳入标准,选择成人安氏Ⅰ类错
患者20例作为对照组,10例单侧磨牙正锁
患者(单侧组)、10例双侧磨牙正锁
患者(双侧组)作为实验组。患者拍摄锥形束CT,通过测量关节窝宽度、关节窝高度、关节结节倾斜度、髁突长轴、髁突短轴、髁突水平角及颞下颌关节间隙的大小,比较颞下颌关节形态和位置。利用软件模拟患者咬合情况,进行下颌骨形态三维有限元分析,评估下颌骨的受力变形情况,进一步探讨下颌骨形态受力与患者可能存在的颞下颌关节紊乱症状的关系。 结果 比较对照组左侧、单侧组锁
侧、双侧组左侧颞下颌关节,结果显示关节上间隙单侧组小于对照组(P<0.05);髁突长轴单、双侧组均小于对照组(P<0.05),且单侧组大于双侧组(P<0.05);髁突短轴双侧组小于对照组(P<0.05);髁突水平角单、双侧组均大于对照组(P<0.05)。对比对照组右侧、单侧组正常侧、双侧组右侧关节形态和位置,结果显示关节上间隙单、双侧组均小于对照组(P<0.05),髁突长轴双侧组小于对照组(P<0.05),髁突短轴单侧组正常侧大于双侧组。三维有限元分析:后牙正锁
患者的髁突是咬合变形集中区域,锁
侧第一磨牙咬合时,X轴与Z轴方向上,变形最大区位于髁突。X轴方向上,髁突变形量锁
侧大于正常侧,在Z轴方向,正常侧大于锁
侧。X轴方向局部变形最大值点在锁
侧髁突内极横嵴前后,而局部变形最小值点在正常侧髁突内极中1/3前斜面处;Z轴方向局部变形最大值点位于正常侧髁突外极及外极下方;对不同咬合情况进行模拟发现,髁突X轴变形值在正常侧磨牙咬合、Y轴变形值在正常侧前磨牙咬合以及Z轴变形值在正中咬合最大,髁突变形值在锁
时并不最为显著。 结论 单、双侧磨牙正锁
髁突形态短小,双侧组相对单侧组存在更加短小的髁突形态。磨牙正锁
患者的髁突是不良咬合变形集中区域,其变形最大点位分布于髁突内外极横嵴附近。不良咬合情况对髁突变形值有影响,但不能说明二者之间是否有明确因果关系。
中图分类号:
褚天昊, 张雪颖, 王浩丞, 马浩杰, 刘媛媛. 磨牙正锁患者颞下颌关节形态学及咬合应力下髁突三维有限元分析[J]. 华西口腔医学杂志, 2025, 43(1): 114-125.
Chu Tianhao, Zhang Xueying, Wang Haocheng, Ma Haojie, Liu Yuanyuan. Three-dimensional finite element feature analysis of the mandible and morphology and position of temporomandibular joint in patients with unilateral and bilateral molar scissor bite[J]. West China Journal of Stomatology, 2025, 43(1): 114-125.
表 1
颞下颌关节测量项目及内容
名称 | 英文 | 测量项目含义 |
---|---|---|
关节窝宽度 | width of the fossa,WF | 在垂直于髁突长轴的矫正斜矢状位下,连接关节窝后壁最下点和关节结节最下点,此连线位于关节窝内的部分为关节窝宽度 |
关节窝高度 | height of the fossa,HF | 在垂直于髁突长轴的矫正斜矢状位下,连接关节窝后壁最下点和关节结节最下点,关节窝最上点到此连线的垂直距离为关节窝高度 |
关节结节倾斜度 | articular eminence inclination,AEI | 关节结节最下点与关节窝最上点连线与关节结节最下点与关节窝后壁最下点连线的交角 |
髁突长轴 | long axis of the condyle,LAC | 在髁突面积最大的横断面上测量髁突的最大内外径 |
髁突短轴 | minor axis of the condyle,MAC | 在髁突面积最大的横断面上测量髁突的最大前后径 |
髁突水平角 | horizontal angle of the condyle,HAC | 髁突长轴与冠状水平线间的夹角 |
关节前间隙 | anterior joint space,AJS | 过关节窝顶点向髁突前斜面作切线,切点与关节结节后斜面的最短距离 |
关节上间隙 | superior joint space,SJS | 关节窝顶点与髁突顶点连线的距离 |
关节后间隙 | posterior joint space,PJS | 过关节窝顶点向髁突后斜面作切线,切点与关节窝后壁的最短距离 |
表 4
对照组双侧关节形态和位置的比较
项目 | 左侧 | 右侧 | P值 |
---|---|---|---|
关节上间隙/mm | 3.91±1.12 | 3.92±0.92 | 0.975 |
关节前间隙/mm | 2.61±0.96 | 2.95±1.50 | 0.435 |
关节后间隙/mm | 1.97±0.39 | 2.09±0.43 | 0.639 |
髁突长轴/mm | 20.94±2.11 | 20.97±2.17 | 0.943 |
髁突短轴/mm | 8.66±1.01 | 8.35±0.76 | 0.111 |
关节窝高度/mm | 5.82±1.43 | 5.57±0.95 | 0.503 |
关节窝宽度/mm | 15.29±1.86 | 16.47±0.80 | 0.180 |
关节结节斜度/° | 35.86±7.37 | 35.57±10.78 | 0.948 |
髁突水平角/° | 15.23±4.95 | 17.94±6.36 | 0.374 |
表 5
单侧组双侧关节形态和位置的比较
项目 | 锁![]() | 正常侧 | P值 |
---|---|---|---|
关节上间隙/mm | 2.48±0.44 | 2.64±0.20 | 0.234 |
关节前间隙/mm | 2.48±0.85 | 2.24±0.61 | 0.603 |
关节后间隙/mm | 1.80±0.44 | 1.76±0.38 | 0.852 |
髁突长轴/mm | 18.76±2.11 | 18.55±3.57 | 0.807 |
髁突短轴/mm | 8.02±1.43 | 7.99±1.49 | 0.932 |
关节窝高度/mm | 6.33±1.08 | 5.85±1.08 | 0.157 |
关节窝宽度/mm | 16.73±1.73 | 16.74±2.79 | 0.984 |
关节结节斜度/° | 35.60±6.48 | 36.02±7.80 | 0.872 |
髁突水平角/° | 23.32±7.93 | 21.71±7.66 | 0.421 |
表 6
双侧组双侧关节形态和位置的比较
项目 | 左侧 | 右侧 | P值 |
---|---|---|---|
关节上间隙/mm | 2.94±0.74 | 2.66±0.78 | 0.344 |
关节前间隙/mm | 2.44±0.68 | 2.64±1.12 | 0.720 |
关节后间隙/mm | 2.04±0.45 | 1.73±0.33 | 0.239 |
髁突长轴/mm | 16.71±1.43 | 19.28±2.26 | 0.419 |
髁突短轴/mm | 6.83±1.11 | 6.64±1.25 | 0.675 |
关节窝高度/mm | 6.10±0.92 | 6.57±0.42 | 0.305 |
关节窝宽度/mm | 15.76±2.25 | 15.91±1.38 | 0.871 |
关节结节斜度/° | 34.78±2.93 | 36.79±2.62 | 0.292 |
髁突水平角/° | 25.44±7.40 | 25.71±8.67 | 0.888 |
表 7
对照组左侧、单侧组锁侧、双侧组左侧关节形态和位置的比较
项目 | 对照组左侧 | 单侧组锁![]() | 双侧组左侧 | F值/H值* | P值 |
---|---|---|---|---|---|
关节上间隙/mm | 3.91±1.12 | 2.48±0.44a | 2.94±0.74 | 6.297* | 0.031* |
关节前间隙/mm | 2.61±0.96 | 2.48±0.85 | 2.44±0.68 | 0.306* | 0.858* |
关节后间隙/mm | 1.97±0.39 | 1.80±0.44 | 2.04±0.45 | 0.628 | 0.544 |
髁突长轴/mm | 20.94±2.11 | 18.76±2.11a,c | 16.71±1.43b | 7.777 | 0.003 |
髁突短轴/mm | 8.66±1.01 | 8.02±1.43 | 6.83±1.11b | 3.725 | 0.043 |
关节窝高度/mm | 5.82±1.43 | 6.33±1.08 | 6.10±0.92 | 0.354 | 0.706 |
关节窝宽度/mm | 15.29±1.86 | 16.73±1.73 | 15.76±2.25 | 1.071 | 0.363 |
关节结节斜度/° | 35.86±7.37 | 35.60±6.48 | 34.78±2.93 | 0.062 | 0.940 |
髁突水平角/° | 15.23±4.95 | 23.32±7.93a | 25.44±7.40b | 3.706 | 0.044 |
表 8
对照组右侧、单侧组正常侧、双侧组右侧关节形态和位置的比较
项目 | 对照组左侧 | 单侧组锁![]() | 双侧组左侧 | F值/H值* | P值 |
---|---|---|---|---|---|
关节上间隙/mm | 3.92±0.92 | 2.64±0.20a | 2.66±0.78b | 9.2185* | 0.010* |
关节前间隙/mm | 2.95±1.50 | 2.24±0.61 | 2.64±1.12 | 1.488 | 0.251 |
关节后间隙/mm | 2.09±0.43 | 1.76±0.38 | 1.73±0.33 | 1.749 | 0.201 |
髁突长轴/mm | 20.97±2.17 | 18.55±3.57 | 19.28±2.26b | 4.319 | 0.028 |
髁突短轴/mm | 8.35±0.76 | 7.99±1.49c | 6.64±1.25 | 3.458 | 0.052 |
关节窝高度/mm | 5.57±0.95 | 5.85±1.08 | 6.57±0.42 | 2.240 | 0.134 |
关节窝宽度/mm | 16.47±0.80 | 16.74±2.79 | 15.91±1.38 | 0.480* | 0.787* |
关节结节斜度/° | 35.57±10.78 | 36.02±7.80 | 36.79±2.62 | 0.043 | 0.958 |
髁突水平角/° | 17.94±6.36 | 21.71±7.66 | 25.71±8.67 | 1.656 | 0.217 |
表 9
不同咬合情况下模型定向变形值 (mm)
咬合方式 | 定向变形 | X轴 | Y轴 | Z轴 |
---|---|---|---|---|
前牙咬合 | 最大定向变形值 | 0.002 7 | 0.007 7 | 0.002 7 |
最小定向变形值 | |-0.005 9| | |-0.011| | |-0.021| | |
正中咬合 | 最大定向变形值 | 0.002 7 | 0.005 5 | 0.004 |
最小定向变形值 | |-0.002 9| | |-0.007 3| | 0.017 | |
锁![]() | 最大定向变形值 | 0.001 8 | 0.003 4 | 0.001 6 |
最小定向变形值 | |-0.003 2| | |-0.004 4| | |-0.011| | |
正常侧磨牙咬合 | 最大定向变形值 | 0.008 4 | 0.002 2 | 0.002 6 |
最小定向变形值 | |-0.007 7| | |-0.003| | |-0.007 2| | |
锁![]() | 最大定向变形值 | 0.002 1 | 0.005 8 | 0.001 9 |
最小定向变形值 | |-0.004 1| | |-0.006 1| | |-0.015| | |
正常侧前磨牙咬合 | 最大定向变形值 | 0.007 7 | 0.005 1 | 0.002 |
最小定向变形值 | |-0.004 2| | |-0.01| | |-0.016| |
1 | 叶莉娜, 何家才. 单侧后牙正锁𬌗、反𬌗对下颌升支及髁突对称性影响的临床观察[J]. 口腔颌面外科杂志, 2020, 30(6): 382-386. |
Ye LN, He JC. Clinical observation of the effect of unila-teral posterior scissors-bite and crossbite on the symmetry of mandibular ramus and condyle[J]. J Oral Maxillofac Surg, 2020, 30(6): 382-386. | |
2 | Baik UB, Kim Y, Sugawara J, et al. Correcting severe scissor bite in an adult[J]. Am J Orthod Dentofac Orthop, 2019, 156(1): 113-124. |
3 | Lambourne C, Lampasso J, Buchanan WC Jr, et al. Ma-locclusion as a risk factor in the etiology of headaches in children and adolescents[J]. Am J Orthod Dentofacial Or-thop, 2007, 132(6): 754-761. |
4 | Thilander B, Rubio G, Pena L, et al. Prevalence of temporomandibular dysfunction and its association with ma-locclusion in children and adolescents: an epidemiologic study related to specified stages of dental development[J]. Angle Orthod, 2002, 72(2): 146-154. |
5 | Egermark I, Magnusson T, Carlsson GE. A 20-year follow-up of signs and symptoms of temporomandibular disorders and malocclusions in subjects with and without orthodontic treatment in childhood[J]. Angle Orthod, 2003, 73(2): 109-115. |
6 | Tomonari H, Kubota T, Yagi T, et al. Posterior scissors-bite: masticatory jaw movement and muscle activity[J]. J Oral Rehabil, 2014, 41(4): 257-265. |
7 | Manfredini D, Lombardo L, Siciliani G. Temporomandibular disorders and dental occlusion. A systematic review of association studies: end of an era[J]. J Oral Rehabil, 2017, 44(11): 908-923. |
8 | 郭维鹏, 李亚兰, 唐志雄, 等. 包含颞下颌关节的下颌骨有限元建模[J]. 生物医学工程研究, 2013, 32(3): 162-166. |
Guo WP, Li YL, Tang ZX, et al. Finite element modeling of the mandible with temporomandibular joint[J]. J Biomed Eng Res, 2013, 32(3): 162-166. | |
9 | 杨文华, 赵宝莲, 孙庚林, 等. 下颌骨颏部正中骨折二维与三维坚强内固定的三维有限元研究[J]. 实用口腔医学杂志, 2011, 27(4): 495-500. |
Yang WH, Zhao BL, Sun GL, et al. Three-dimensional finite element study of two-and three-dimensional internal fixation for mandibular symphysis fracture[J]. J Pract Stomatol, 2011, 27(4): 495-500. | |
10 | 张渊, 王美青, 凌伟. 用于分析𬌗面形态与颞下颌关节生物力学关系的三维有限元模型的建立[J]. 医用生物力学, 2004, 19(4): 249-252. |
Zhang Y, Wang MQ, Ling W. Establishment of three-dimensional FEM model for evaluation of biomechanical relationship between temporomadibular joint morphology and bilateral condyles[J]. J Med Biomech, 2004, 19(4): 249-252. | |
11 | Tanne K, Tanaka E, Sakuda M. Stress distribution in the temporomandibular joint produced by orthopedic chincup forces applied in varying directions: a three-dimensional analytic approach with the finite element method[J]. Am J Orthod Dentofacial Orthop, 1996, 110(5): 502-507. |
12 | 王美青, 姚秀芳, 颜朝云, 等. 咬合与髁状突形态的对称性间的相关关系解剖学[J]. 实用口腔医学杂志, 2001, 17(2): 147-150. |
Wang MQ, Yao XF, Yan CY, et al. An anatomic study on the relationship between occlusion symmetry and condyle symmetry[J]. J Pract Stomatol, 2001, 17(2): 147-150. | |
13 | 李爽, 马啸宙, 谢冰鑫, 等. 单、双侧磨牙正锁𬌗患者颞下颌关节形态和位置的锥形束CT研究[J]. 中华口腔正畸学杂志, 2023, 30(2): 81-85. |
Li S, Ma XZ, Xie BX, et al. The cone beam CT study of temporomandibular joint morphology and position in patients with unilateral and bilateral molar scissors bite[J]. Chin J Orthod, 2023, 30(2): 81-85. | |
14 | 仲晓飞, 杜原宏. 磨牙正锁𬌗对髁突形态的影响[J]. 中国临床实用医学, 2014, 5(5): 8-10. |
Zhong XF, Du YH. Effect of posterior buccal crossbite on condylar morphology[J]. Chin Clin Pract Med, 2014, 5(5): 8-10. | |
15 | 陈志兴, 郑怡, 王瑶, 等. 双侧第二磨牙正锁𬌗对下颌骨发育和位置的影响[J]. 中华口腔正畸学杂志, 2016, 23(2): 89-93. |
Chen ZX, Zheng Y, Wang Y, et al. The effect of bilateral scissor bite of second molars on the growth and position of mandible[J]. Chin J Orthod, 2016, 23(2): 89-93. | |
16 | 李爽, 张洪宇, 易周, 等. 单、双侧第二磨牙正锁𬌗与颞下颌关节退行性关节病的CBCT研究[J]. 实用口腔医学杂志, 2023, 39(6): 774-778. |
Li S, Zhang HY, Yi Z, et al. A CBCT study on the relationship between unilateral and bilateral second molar scissors bite and temporomandibular joint degenerative joint disease[J]. J Pract Stomatol, 2023, 39(6): 774-778. | |
17 | 魏子明, 林丽佳, 李旼劼, 等. 青少年单侧后牙正锁𬌗畸形患者双侧髁突在关节窝内位置及其形态变化研究[J]. 中国实用口腔科杂志, 2019, 12(7): 426-429. |
Wei ZM, Lin LJ, Li MJ, et al. Analysis of the position and morphology of the bilateral condyles in the articular fossa in adolescent patients with unilateral scissors-bite posterior molar[J]. Chin J Pract Stomatol, 2019, 12(7): 426-429. | |
18 | Guercio Monaco E, De Stefano AA, Hernandez-Andara A, et al. Correlation between condylar size on CT and position of the articular disc on MRI of the temporomandibular joint[J]. Cranio, 2022, 40(1): 64-71. |
19 | 柴明珠, 李新. 夜磨牙、偏侧咀嚼患者颞下颌关节的锥形束CT研究[C]// 第20次全国颞下颌关节病学及𬌗学研讨会暨第七届亚洲颞下颌关节学术大会. 北京: 中华口腔医学会颞下颌关节病学及𬌗学专业委员会, 2023: 347-348. |
Chai MZ, Li X. Conical beam CT study of temporomandibular joints in patients with night molar and lateral chewing[C]//Proceedings of the 20th annual meeting of society of temporomandibular disorders & occlusion and the 7th Asian academic congress for temporomandibular joint. Beijing: Professional Committee of Temporomandibular Arthropathy and Occlusion of Chinese Stomatological Association, 2023: 347-348. | |
20 | Li CX, Xie X, Li MJ, et al. A pilot investigation of condylar position and asymmetry in patients with unilateral posterior scissors-bite malocclusion based on three-dimensional reconstructive imaging technique[J]. BMC Musculoskelet Disord, 2023, 24(1): 253. |
21 | 吕云松, 李朝晖. 颞下颌关节紊乱综合征伴偏侧咀嚼患者锥形束CT特征分析[J]. 上海口腔医学, 2022, 31(6): 653-656. |
Lü YS, Li ZH. Cone beam CT imaging findings in patients with temporomandibular joint disorder syndrome and unilateral chewing[J]. Shanghai J Stomatol, 2022, 31(6): 653-656. | |
22 | de Stefano AA, Guercio-Monaco E, Hernández-Andara A, et al. Association between temporomandibular joint disc position evaluated by magnetic resonance imaging and mandibular condyle inclination evaluated by computed tomography[J]. J Oral Rehabil, 2020, 47(6): 743-749. |
23 | Amorim MY, Alves MGO, Almeida JD, et al. Inclination of the condylar long axis is not related to temporomandibular disc displacement[J]. J Invest Clin Dent, 2019, 10(1): e12375. |
24 | 韩婧文, 王蕾, 任诗琦, 等. 青少年颞下颌关节形态特征与下颌骨三维方向生长的相关性研究[J]. 国际口腔医学杂志, 2024, 51(4): 456-466. |
Han JW, Wang L, Ren SQ, et al. Correlation between morphological characteristics of the temporomandibular joint and three-dimensional mandibular growth in adolescents[J]. Int J Stomatol, 2024, 51(4): 456-466. | |
25 | Tomonari H, Kubota T, Yagi T, et al. Posterior scissors-bite: masticatory jaw movement and muscle activity[J]. J Oral Rehabil, 2014, 41(4): 257-265. |
26 | Sritara S, Matsumoto Y, Lou YX, et al. Association between the temporomandibular joint morphology and chewing pattern[J]. Diagnostics (Basel), 2023, 13(13): 2177. |
27 | Sezgin OS, Celenk P, Arici S. Mandibular asymmetry in different occlusion patterns[J]. Angle Orthod, 2007, 77(5): 803-807. |
28 | 孙舒寒, 马若晗, 衷尔静, 等. 单侧后牙正锁𬌗治疗前后髁突位置和形态CBCT研究[J]. 中华口腔正畸学杂志, 2020, 27(4): 205-211. |
Sun SH, Ma RH, Zhong EJ, et al. The CBCT study of condylar positions and morphology changes in unilateral posterior scissors bite before and after orthodontic treatment[J]. Chin J Orthod, 2020, 27(4): 205-211. | |
29 | 岳强, 车霄楠, 海云, 等. 基于CBCT分析正畸前后单侧后牙正锁𬌗的髁突变化[J]. 口腔医学, 2017, 37(10): 910-913. |
Yue Q, Che XN, Hai Y, et al. Study on the condylar morphology and location of unilateral scissors bite posterior molar patients with orthodontic treatment based on CBCT[J]. Stomatology, 2017, 37(10): 910-913. | |
30 | Paknahad M, Shahidi S. Association between mandibular condylar position and clinical dysfunction index[J]. J Craniomaxillofac Surg, 2015, 43(4): 432-436. |
31 | Chang MS, Choi JH, Yang IH, et al. Association between condylar bone density and disk displacement in the temporomandibular joint[J]. J Clin Densitom, 2022, 25(2): 215-222. |
32 | 牟婷琛, 冯剑颖, 阎帆, 等. 不同咀嚼压力对幼兔髁突软骨成骨的影响研究[J]. 口腔医学, 2018, 38(10): 868-871. |
Mou TC, Feng JY, Yan F, et al. Effect of altered mastication on the osteogenesis of condylar cartilage[J]. Stomatology, 2018, 38(10): 868-871. | |
33 | Tanaka E, Tanaka M, Watanabe M, et al. Influences of occlusal and skeletal discrepancies on biomechanical environment in the TMJ during maximum clenching: an analytic approach with the finite element method[J]. J Oral Rehabil, 2001, 28(9): 888-894. |
34 | Feng Y, Shu J, Liu Y, et al. Biomechanical analysis of temporomandibular joints during mandibular protrusion and retraction motions: a 3D finite element simulation[J]. Comput Methods Programs Biomed, 2021, 208: 106299. |
35 | 武付花, 黄迪炎, 郭振国, 等. 三维有限元分析下颌骨不同部位受力髁突的力学应变[J]. 中国组织工程研究, 2015, 19(29): 4667-4671. |
Wu FH, Huang DY, Guo ZG, et al. Three-dimensional finite element analysis of stress distribution of mandibular condylar under indirect force[J]. Chin J Tissue Eng Res, 2015, 19(29): 4667-4671. | |
36 | 孙健, 张富强, 王冬梅, 等. 3种加载方式下正常人下颌骨三维有限元应力分布分析[J]. 上海口腔医学, 2004, 13(1): 41-43. |
Sun J, Zhang FQ, Wang DM, et al. Stress analysis of the mandible by 3D FEA in normal human being under th-ree loading conditions[J]. Shanghai J Stomatol, 2004, 13(1): 41-43. | |
37 | Manfredini D, Perinetti G, Stellini E, et al. Prevalence of static and dynamic dental malocclusion features in subgroups of temporomandibular disorder patients: implications for the epidemiology of the TMD-occlusion association[J]. Quintessence Int, 2015, 46(4): 341-349. |
[1] | 孙俊辉, 蓝朵朵, 王栋, 徐瑶, 王泽宇, 张晨晨, 张凯, 徐涛. 3种方式的坚固内固定髁突头部骨折的生物力学分析[J]. 华西口腔医学杂志, 2025, 43(1): 126-132. |
[2] | 毕瑞野, 祝颂松. 人工颞下颌关节在口腔颌面外科中应用的策略思考与展望[J]. 华西口腔医学杂志, 2024, 42(5): 551-557. |
[3] | 于海洋, 颜哲彬, 解晨阳, 吴秦. 正中关系的临床决策[J]. 华西口腔医学杂志, 2024, 42(5): 558-565. |
[4] | 袁莉红, 陈晨, 马语笛, 梁睿贞. 包封骨形态发生蛋白2的不同相对分子质量聚乳酸-聚乙醇酸共聚物微囊促进成骨效果的研究[J]. 华西口腔医学杂志, 2024, 42(5): 572-580. |
[5] | 龚衍吉, 刘洋, 尹德强. 数字孪生辅助调整颌位流程的临床新技术和应用效果研究[J]. 华西口腔医学杂志, 2024, 42(2): 268-276. |
[6] | 闫森, 乔永明, 段亮伟. 37例颞下颌关节盘不可复性前移位患者自然转归的临床及磁共振成像特征分析[J]. 华西口腔医学杂志, 2024, 42(1): 82-88. |
[7] | 王良涛, 李珊, 陆豆豆, 陈铮. 基于正交试验梯度多孔牙种植体结构的设计研究[J]. 华西口腔医学杂志, 2023, 41(6): 647-652. |
[8] | 李晨曦, 帕热克江·帕塔尔null, 龚忠诚. 颞下颌关节色素沉着绒毛结节性滑膜炎的数字化诊疗1例[J]. 华西口腔医学杂志, 2023, 41(6): 725-730. |
[9] | 罗恩. 髁突肥大继发牙颌面畸形的诊断与治疗[J]. 华西口腔医学杂志, 2023, 41(4): 369-376. |
[10] | 康芙嘉, 余磊, 张琦, 李欣鹏, 胡志强, 朱宪春. 隐形矫治器远移下颌第一磨牙的三维有限元研究[J]. 华西口腔医学杂志, 2023, 41(4): 405-413. |
[11] | 王铁彪, 周五超, 肖寅, 程家龙, 欧阳洲城, 程晨, 习伟宏. 改良关节盘锚固术在颞下颌关节盘穿孔、破裂治疗中的应用[J]. 华西口腔医学杂志, 2023, 41(4): 434-442. |
[12] | 付彧, 李紫薇, 赵梦晗, 史瑞新. 颏部形态对正畸治疗影响的研究[J]. 华西口腔医学杂志, 2023, 41(4): 443-449. |
[13] | 钟嘉伟, 范佩迪, 胡首杉, 高新林, 李奕君, 王军, 熊鑫. 前后![]() |
[14] | 邬浩, 李莹, 王玉琢, 于继泽, 包幸福, 胡敏. 重组人成纤维细胞生长因子21调节成牙骨质细胞矿化作用及其机制研究[J]. 华西口腔医学杂志, 2023, 41(2): 140-148. |
[15] | 鄢梨, 周茂强, 邱嘉旋. 颞下颌关节盘前移位患者关节骨形态与矢状向关节盘位置的关系[J]. 华西口腔医学杂志, 2022, 40(4): 414-421. |
阅读次数 | ||||||
全文 |
|
|||||
摘要 |
|
|||||