无髓后牙全瓷高嵌体修复的研究进展

doi:10.7518/hxkq.2018.04.017

摘要/Abstract

摘要：

无髓后牙的微创修复是临床研究的一个热点,近年来,随着粘接技术及全瓷材料的发展,高强度全瓷高嵌体因其微创、美观、对机械固位要求较低等优势,在后牙根管治疗后的修复中应用逐渐广泛。本文从材料、牙体预备、粘接及其临床应用注意事项等方面,对全瓷高嵌体在无髓后牙牙体缺损修复中的应用进展进行综述,以期为临床工作提供参考。

关键词: 无髓后牙, 高嵌体, 全瓷材料, 牙体预备, 粘接

Abstract:

Minimal invasive restoration is a common technique in the restoration of pulpless posterior teeth. The deve-lopment of bonding techniques and ceramic materials in recent years has increased the use of high-strength ceramic onlay in the restoration of endodontically treated posterior teeth because of its minimal invasiveness, improved aesthetics, and low requirement of mechanical retention. This study conducts a retrospective analysis on the material, tooth preparation, bonding, and clinical considerations of ceramic onlay in endodontically treated posterior tooth.

Key words: pulpless posterior tooth, onlay, ceramic material, tooth preparation, bonding

中图分类号:

R783.3

强卫林, 李雨轩. 无髓后牙全瓷高嵌体修复的研究进展[J]. 华西口腔医学杂志, 2018, 36(4): 447-451.

Weilin Qiang, Yuxuan Li. Research progress in pulpless posterior tooth restored with ceramic onlay[J]. West China Journal of Stomatology, 2018, 36(4): 447-451.

参考文献 39

[1]	Lam S, Halliday K, Qasim T. The effects of cyclic loading on fracture modes in brittle layer structures: relevance to failure of dental crowns[J]. Adv Mater Res, 2008, 41/42: 21-26.
[2]	Ferrari M, Vichi A, Grandini S.Efficacy of different adhe-sive techniques on bonding to root canal walls: an SEM investigation[J]. Dent Mater, 2001, 17(5): 422-429.
[3]	Dietschi D, Duc O, Krejci I, et al.Biomechanical conside-rations for the restoration of endodontically treated teeth: a systematic review of the literature, Part Ⅱ (Evaluation of fatigue behavior, interfaces, and in vivo studies)[J]. Quin-tessence Int, 2008, 39(2): 117-129.
[4]	Hickel R, Manhart J.Longevity of restorations in posterior teeth and reasons for failure[J]. J Adhes Dent, 2001, 3(1): 45-64.
[5]	Beham G.IPS-Empress: a new ceramic technology[J]. ZWR, 1991, 100(6): 404-408.
[6]	Tinschert J, Natt G, Mautsch W, et al.Fracture resistance of lithium disilicate-, alumina-, and zirconia-based three-unit fixed partial dentures: a laboratory study[J]. Int J Pros-thodont, 2001, 14(3): 231-238.
[7]	Santos MJ, Freitas MC, Azevedo LM, et al.Clinical eva-luation of ceramic inlays and onlays fabricated with two systems: 12-year follow-up[J]. Clin Oral Investig, 2016, 20(7): 1683-1690.
[8]	Jalalian E, Moghaddam L, Sadegh M.Comparison of frac-ture strength between two systems: IPS Empress 2 and IPS E.max press[J]. J Dent, 2008, 9(1): 51-57.
[9]	Guess P, Zavanelli R, Silva N, et al.Fatigue testing of mono-lithic lithium-disilicate and veneer-zirconia all-ceramic crown systems[C]. Washington: AADR Annual Meeting, 2010.
[10]	Yildiz C, Vanlıoğlu BA, Evren B, et al.Fracture resistance of manually and CAD/CAM manufactured ceramic onlays[J]. J Prosthodont, 2013, 22(7): 537-542.
[11]	Otto T, De Nisco S.Computer-aided direct ceramic resto-rations: a 10-year prospective clinical study of Cerec CAD/CAM inlays and onlays[J]. Int J Prosthodont, 2002, 15(2): 122-128.
[12]	Otto T, Schneider D.Long-term clinical results of chairside Cerec CAD/CAM inlays and onlays: a case series[J]. Int J Prosthodont, 2008, 21(1): 53-59.
[13]	骆小平, 赵云凤, 刘高杰. Vita MarkⅡ型可切削陶瓷的金相分析[J]. 临床口腔医学杂志, 1998, 14(1): 22-24.
	Luo XP, Zhao YF, Liu GJ.Metallographical analysis on vita mark Ⅰ machinable ceramic[J]. J Clin Stomatol, 1998, 14(1): 22-24.
[14]	Chong KH, Chai J, Takahashi Y, et al.Flexural strength of In-Ceram alumina and In-Ceram zirconia core materials[J]. Int J Prosthodont, 2002, 15(2): 183-188.
[15]	伊哲, 洪岩松, 郝玉全, 等. Ceramage聚合瓷高嵌体修复后牙牙体缺损疗效观察[J]. 山东医药, 2012, 52(22): 76-77.
	Yi Z, Hong YS, Hao YQ, et al.Clinical observation of Cera-mage onlay for the restoration of posterior teeth defect[J]. Shandong Med J, 2012, 52(22): 76-77.
[16]	Papa J, Cain C, Messer HH.Moisture content of vital vs endodontically treated teeth[J]. Endod Dent Traumatol, 1994, 10(2): 91-93.
[17]	Sedgley CM, Messer HH.Are endodontically treated teeth more brittle[J]. J Endod, 1992, 18(7): 332-335.
[18]	Creugers NH, Mentink AG, Fokkinga WA, et al.5-year follow-up of a prospective clinical study on various types of core restorations[J]. Int J Prosthodont, 2005, 18(1): 34-39.
[19]	Edelhoff D, Sorensen JA.Tooth structure removal associated with various preparation designs for anterior teeth[J]. J Pros-thet Dent, 2002, 87(5): 503-509.
[20]	Banks RG.Conservative posterior ceramic restorations: a literature review[J]. J Prosthet Dent, 1990, 63(6): 619-626.
[21]	Etemadi S, Smales RJ, Drummond PW, et al.Assessment of tooth preparation designs for posterior resin-bonded porcelain restorations[J]. J Oral Rehabil, 1999, 26(9): 691-697.
[22]	王慧媛, 张春光, 刘玉红, 等. 牙体预备对高嵌体修复下颌第一磨牙力学影响的初步研究[J]. 现代生物医学进展, 2013, 13(34): 6647-6649.
	Wang HY, Zhang CG, Liu YH, et al.Primary research on the effects of tooth preparation on mandibular first molar with onlay restoration[J]. Prog Mod Biomed, 2013, 13(34): 6647-6649.
[23]	Soares CJ, Martins LR, Fonseca RB, et al.Influence of cavity preparation design on fracture resistance of posterior Leucite-reinforced ceramic restorations[J]. J Prosthet Dent, 2006, 95(6): 421-429.
[24]	Malament KA, Socransky SS.Survival of Dicor glass-cera-mic dental restorations over 14 years. Part Ⅱ: effect of thick-ness of Dicor material and design of tooth preparation[J]. J Prosthet Dent, 1999, 81(6): 662-667.
[25]	Tavarez RR, Firoozmand LM, Silva MB, et al.Overlays or ceramic fragments for tooth restoration: an analysis of frac-ture resistance[J]. J Contemp Dent Pract, 2014, 15(1): 56-60.
[26]	Mondelli J, Sene F, Ramos RP, et al.Tooth structure and fracture strength of cavities[J]. Braz Dent J, 2007, 18(2): 134-138.
[27]	Fages M, Bennasar B.The endocrown: a different type of all-ceramic reconstruction for molars[J]. J Can Dent Assoc, 2013, 79: d140.
[28]	Arnetzl GV, Arnetzl G.Reliability of nonretentive all-cera-mic CAD/CAM overlays[J]. Int J Comput Dent, 2012, 15(3): 185-197.
[29]	Hayes A, Duvall N, Wajdowicz M, et al.Effect of endocrown pulp chamber extension depth on molar fracture resistance[J]. Oper Dent, 2017, 42(3): 327-334.
[30]	Thompson MC, Thompson KM, Swain M. The all-ceramic, inlay supported fixed partial denture. Part 1. Ceramic inlay preparation design: a literature review[J]. Aust Dent J, 2010, 55(2): 120-127; quiz 231.
[31]	陈岗, 陈志飞, 顾卫平, 等. 不同边缘设计椅旁CAD/CAM全瓷高嵌体修复的对比研究[J]. 口腔医学, 2015, 35(7): 550-552.
	Chen G, Chen ZF, Gu WP, et al.The comparative study of all-ceramic onlay restorations generated by chair-side CAD/CAM with different margin designs[J]. Stomatology, 2015, 35(7): 550-552.
[32]	Didier Dietschi, Roberto Spreafico, 何利邦, 等. 嵌体和高嵌体粘结修复的循证理念及治疗要点第一部分: 一种生物替代治疗的历史回顾及其临床合理性[J]. 中国口腔医学继续教育杂志, 2016, 19(6): 278-287.
	Dietschi D, Spreafico R, He LB, et al.Evidence-based con-cepts and procedures for bonded inlays and onlays. part Ⅰ. Historical perspectives and clinical rationale for a biosub-stitutive approach[J]. Chin J Stomatol Contin Edu, 2016, 19(6): 278-287.
[33]	王蕾. 不同激光预处理对全瓷嵌体与牙齿表面粘结性能影响的体外研究[D]. 西安: 第四军医大学, 2013.
	Wang L. In vitro study on the effect of bonding property between the ceramic inlays and the teeth after treated by different lasers[D]. Xi’an: The Fourth Military Medical University, 2013.
[34]	孙玉春, Anatoliy Vorobyev, 刘晶, 等. 飞秒激光切削牙齿硬组织表面粗糙度和显微形貌观察[J]. 中华口腔医学杂志, 2012, 47(8): 486-489.
	Sun YC, Anatoliy V, Liu J, et al.Femtosecond pulsed laser ablation of dental hard tissues with numerical control: a roughness and morphology study[J]. Chin J Stomatol, 2012, 47(8): 486-489.
[35]	王丹杨. 不同表面处理对IPS e.Max press铸瓷粘结性能影响的研究[D]. 西安: 第四军医大学, 2009.
	Wang DY.The effect of different surface treatments on the bond strength between IPS e.max press ceramic and resin cement[D]. Xi’an: The Fourth Military Medical University, 2009.
[36]	Prakki A, Cilli R, Da Costa AU, et al.Effect of resin luting film thickness on fracture resistance of a ceramic cemented to dentin[J]. J Prosthodont, 2007, 16(3): 172-178.
[37]	Nagasiri R, Chitmongkolsuk S.Long-term survival of endo-dontically treated molars without crown coverage: a retro-spective cohort study[J]. J Prosthet Dent, 2005, 93(2): 164-170.
[38]	周进茹, 陈西文, 朱智敏. 全瓷冠与高嵌体用于修复邻面缺损根管治疗后下颌磨牙抗折强度对比研究[J]. 中国实用口腔科杂志, 2017, 10(1): 26-30.
	Zhou JR, Chen XW, Zhu ZM.Effect comparison of all-ceramic crowns and onlays in restoring endodontically treated mandibular molar with mesio-occlusal defect[J]. Chin J Pract Stomatol, 2017, 10(1): 26-30.
[39]	Goel VK, Khera SC, Gurusami S, et al.Effect of cavity depth on stresses in a restored tooth[J]. J Prosthet Dent, 1992, 67(2): 174-183.