种植牙即刻负重的生物力学的三维有限元分析

doi:10.3969/j.issn.1000-1182.2011.02.003

华西口腔医学杂志

种植牙即刻负重的生物力学的三维有限元分析

韩雪莲刘宗伟李岩涛

山东省日照市中医医院口腔科，日照276800

收稿日期:2011-04-25 修回日期:2011-04-25 出版日期:2011-04-20 发布日期:2011-04-20
通讯作者: 刘宗伟，Tel: 0633-8290861
作者简介:韩雪莲（1972—），女，山东人，主治医师，硕士

Three dimensional finite element analysis of biomechanical distribution of dental implants with immediate loading

HAN Xue-lian, LIU Zong-wei, LI Yan-tao

Dept. of Stomatology, Rizhao Hospital of Traditional Chinese Medicine in Shandong Province, Rizhao 276800, China

Received:2011-04-25 Revised:2011-04-25 Online:2011-04-20 Published:2011-04-20
Contact: LIU Zong-wei，Tel: 0633-8290861

摘要/Abstract

摘要：

目的用三维有限元的方法分析牙种植体不同角度即刻负重的骨界面应力分布规律。方法选成人无牙下颌骨进行薄层螺旋CT扫描，将扫描图像导入通用外科手术集成系统，建立下颌骨三维网格模型。模拟标准的螺纹实心种植体，建立种植体-下颌骨即刻负重的三维有限元模型。以150 N的力轴向加载和分别10°、20°、30°侧向加载，应用ANSYS 10.0分析软件分析种植体骨界面的Von Mises应力及应变。结果成功地建立了一种即刻角度负重的种植体有限元模型；三维有限元分析结果示：轴向加载时骨界面的Von Mises应力集中于颈部骨皮质，应变分布均匀，以颈部骨皮质、底部骨松质及螺纹接触部位的松质骨较为集中；侧向不同角度加载时骨界面的Von Mises应力也集中于颈部骨皮质，但最大值是垂直加载时的4倍，应变分布不均匀，主要集中于颈部骨皮质；随着加载角度的增加，应力、应变值也增加。结论即刻轴向负重时，种植体周围骨质应力及应变无明显集中，分布均匀，侧向负重时应力、应变明显增大，分布不均匀。

关键词: 即刻负重, 牙种植体, 应力, 应变, 三维有限元

Abstract:

Objective To analyze the stress distribution of bone around the dental implants with lateral immediate loading of different angles by three dimensional finite element. Methods An adult edentulous mandible was adopted for CT scanning. The CT image was imported to universal surgical integration system to establish a mandible three dimensional mesh model. The real shape of standard thread implant was simulated and the finite element model of mandible with dental implants for immediate loading was established. The models were immediately loaded with 150 N through the angle of 0°, 10°, 20°, 30°. The ANSYS 10.0 was used to analyze the Von Mises stress on the bone around dental implants. Results The accurate finite element model of mandible with dental implants for immediate loading was successfully established. The three dimensional finite element analytical results showed: Under axial load, the Von Mises stress of bone contact surface concentrated on the cortical bone of the implant cervix. The strain distribution was even, and centralized at the cortical bone of the implant cervix, cancellous bone of implant bottom and thread contact area. Under different lateral angle load, the Von Mises stress of bone contact surface also concentrated on the cortical bone of the implant cervix, but the maximum value was 4 times of the vertical loading, the strain distributed unevenly, mainly concentrated on the cortical bone of the implant cervix. With the load angle increased, the stress and the strain value also increased. Conclusion When an axial force was immediately loaded, the stress value and the strain concentration value of bone interface around the dental implants are not apparently concentrated, the stress is distributed well. While a lateral force is loaded, the stress values and the strain concentration values of bone interface around the dental implants apparently increase and the strain are distributed unevenly.

Key words: immediate loading, dental implant, stress, strain, three dimensional finite element

韩雪莲刘宗伟李岩涛. 种植牙即刻负重的生物力学的三维有限元分析[J]. 华西口腔医学杂志, doi: 10.3969/j.issn.1000-1182.2011.02.003.

HAN Xue-lian, LIU Zong-wei, LI Yan-tao. Three dimensional finite element analysis of biomechanical distribution of dental implants with immediate loading[J]. West China Journal of Stomatology, doi: 10.3969/j.issn.1000-1182.2011.02.003.

[1]	黄威, 李颖辉, 郭凯利, 周永川, 李向军. 唇腭裂术后瘢痕及上颌扩弓联合前牵引治疗对上颌骨发育综合影响的有限元分析[J]. 华西口腔医学杂志, 2020, 38(6): 642-646.
[2]	周洁, 甘雪琦, 卢嘉仪, 范林莉, 朱卓立. 牙种植体作支抗局部正畸直立近中倾斜下颌第二磨牙1例[J]. 华西口腔医学杂志, 2020, 38(6): 708-711.
[3]	张帅, 吕川, 李进红, 朱保民, 王维倩. 基台颈部缓冲层对种植体应力分布影响的三维有限元分析[J]. 华西口腔医学杂志, 2020, 38(5): 537-540.
[4]	刘子嫣,赵凌,杨丽媛,高旭. 开髓方式与全冠修复对上颌中切牙应力分布影响的三维有限元分析[J]. 华西口腔医学杂志, 2019, 37(6): 642-647.
[5]	翟晓阳,张静亚,张三柯,姜川静,邱晓霞. 两种边缘设计的髓腔固位冠修复不同缺损下颌第一磨牙的有限元分析[J]. 华西口腔医学杂志, 2019, 37(5): 480-484.
[6]	甘雪琦,肖宇,马瑞阳,黄椿棚,吴尧,杨帮成,杨齐,包崇云,于海洋. 牙种植体的生物力学研究[J]. 华西口腔医学杂志, 2019, 37(2): 115-123.
[7]	柏思羽,陈悦,戴红卫,黄兰. 机械压应力下骨硬化蛋白对成牙骨质细胞功能影响及机制的体外研究[J]. 华西口腔医学杂志, 2019, 37(2): 162-167.
[8]	宋珊,郑政,杨丽媛,高旭. 上部结构材料和形态设计对种植支持固定修复体被动适合性的影响[J]. 华西口腔医学杂志, 2019, 37(1): 37-41.
[9]	王爽,孙江,于雁云. 三壁骨缺损对牙周膜应力影响的三维有限元分析[J]. 华西口腔医学杂志, 2019, 37(1): 42-47.
[10]	容明灯, 黄雁红, 卢海宾, 徐格林, 李少冰, 苏媛, 陈沛, 姜盼, 张雪洋. 显微牙周外科技术在种植体周附着龈增宽术中的应用[J]. 华西口腔医学杂志, 2018, 36(1): 71-75.
[11]	李传花, 王志峰, 朱丽娜, 范欣, 蓝菁. 牙龈卟啉单胞菌精氨酸特异性牙龈素基因疫苗预防比格犬种植体周围炎的实验研究[J]. 华西口腔医学杂志, 2018, 36(1): 76-81.
[12]	王如意, 赵志河, 李宇. 正畸用热压膜材料现状与展望[J]. 华西口腔医学杂志, 2018, 36(1): 87-91.
[13]	林野. 当代牙种植体设计进步与临床意义[J]. 华西口腔医学杂志, 2017, 35(1): 18-28.
[14]	赵凌, 杨丽媛, 刘翠玲, 高旭. 不同修复方法对深型楔状缺损牙应力分布影响的三维有限元分析[J]. 华西口腔医学杂志, 2017, 35(1): 77-81.
[15]	邢维斌郑淑贤杨适宜. 下颌平面角影响种植体应力分布的有限元分析[J]. 华西口腔医学杂志, 2016, 34(5): 502-505.

种植牙即刻负重的生物力学的三维有限元分析

Three dimensional finite element analysis of biomechanical distribution of dental implants with immediate loading

RichHTML

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价