3种新型复合树脂材料耐磨性及硬度的体外研究

华西口腔医学杂志

3种新型复合树脂材料耐磨性及硬度的体外研究

王立凯石连水朱洪水

南昌大学附属口腔医院修复科, 江西南昌330006

收稿日期:2008-02-25 修回日期:2008-02-25 出版日期:2008-02-20 发布日期:2008-02-20
通讯作者: 石连水，Tel：0791- 6086218
作者简介:王立凯（1972-），男，辽宁人，副主任医师，硕士
基金资助:
江西省卫生厅基金资助项目（2003）

An in vitro investigation of wear r esistance and hardness of thr ee kinds of new composite r esins

WANG Li- kai, SHI Lian- shui, ZHU Hong- shui

Dept. of Prosthodontics, The Affiliated Stomatology Hospital of Nanchang University, Nanchang 330006, China

Received:2008-02-25 Revised:2008-02-25 Online:2008-02-20 Published:2008-02-20
Contact: SHI Lian- shui，Tel：0791- 6086218

摘要/Abstract

摘要：

目的评价3种新型复合树脂材料的耐磨性及硬度。方法选取Solidex、Spectrum、FiltekTM Z350 新型复合树脂材料为研究对象，对照组为釉质。在改装的MG- 200型摩擦磨损实验机上进行磨损实验。扫描电镜观察摩擦表面形貌。用维氏硬度仪测量4种样本的维氏硬度。用秩和检验和单因素方差分析对磨损量和硬度值进行统计分析。通过直线回归分析的方法来分析3种复合树脂磨损量与硬度的相关性。结果3种复合树脂材料中，FiltekTMZ350显示了最低的磨损量和最高的维氏硬度（P<0.05）。Solidex与Spectrum的磨损量和硬度无显著性差异（P>0.05）。3种复合树脂材料的磨损量与硬度间存在显著的相关性（r=- 0.968 6）（P<0.05）。扫描电镜下各材料的摩擦表面形貌显示了不同的磨损特征。结论纳米填料复合树脂的耐磨性及硬度优于混合填料复合树脂。

关键词: 复合树脂, 填料, 耐磨性, 硬度

Abstract:

Objective To evaluate wear resistance and hardness of three kinds of new composite resins. Methods Three kinds of new composite resins, Solidex， Spectrum, FiltekTM Z350, were tested. Enamel as control group. A refited MG- 200 wear machine was used in this study. Scanning electron microscope（SEM）was used to observe the friction surface of each tested material. Hardness of each tested material was determined by Vickers indentation technique. The data of wear and hardness were analyzed by Mann-Whitney test and 1- way ANOVA. The relationship between the hardness of the composites and the amount of wear of them was determined by a regression analysis method. Results FiltekTM Z350 showed the lowest volumetric wear and highest Vickers hardness in the composites （P<0.05）. No significant differences in wear and hardness were observed between Solidex and Spectrum（P >0.05）. Significant relationships were observed between the hardness of the composites and the amount of wear of them （r=- 0.968 6）（P<0.05）. Different wear characters of the friction surface of the tested materials were observed by SEM. Conclusion Nanofilled composite was superior to the hybrid composite in wear resistance and hardness.

Key words: composite resin, filler, wear resistance, hardness

王立凯石连水朱洪水. 3种新型复合树脂材料耐磨性及硬度的体外研究[J]. 华西口腔医学杂志.

WANG Li- kai, SHI Lian- shui, ZHU Hong- shui. An in vitro investigation of wear r esistance and hardness of thr ee kinds of new composite r esins[J]. West China Journal of Stomatology.

[1]	罗文佶, 黄文凯, 徐明华, 任玲, 程玉瑶, 战德松, 付佳乐. 10种复合树脂颜色稳定性与吸水溶解性研究[J]. 华西口腔医学杂志, 2023, 41(1): 58-66.
[2]	张雪娇, 李健新, 蒋凤, 周传健, 吴峻岭. 新型亲水抗菌硅橡胶口腔印模材料的制备及性能研究[J]. 华西口腔医学杂志, 2022, 40(5): 541-548.
[3]	王莹, 杨家雪, 谢海峰, 陈晨. 充填厚度对光固化大块复合树脂充填效果的影响[J]. 华西口腔医学杂志, 2022, 40(2): 169-174.
[4]	梅子彧, 鲁雨晴, 楼雨欣, 张隽婧, 孙蔓琳, 于海洋. 数字光处理打印牙科氧化锆的微观结构和机械性能研究[J]. 华西口腔医学杂志, 2021, 39(5): 576-581.
[5]	薛晶. 大块充填树脂的临床应用影响因素[J]. 华西口腔医学杂志, 2020, 38(3): 233-239.
[6]	薛晶, 杨壁娜. 复合树脂预热的研究现状和临床应用[J]. 华西口腔医学杂志, 2019, 37(6): 571-576.
[7]	张润荃,李大军,赵晓一. 渗透树脂与前牙美学树脂颜色稳定性的比较研究[J]. 华西口腔医学杂志, 2019, 37(3): 270-274.
[8]	刘清,杨玉琼,聂蓉蓉,孟翔峰. 牙本质玷污层特性对自粘接树脂水门汀粘接强度的影响[J]. 华西口腔医学杂志, 2018, 36(6): 619-622.
[9]	吴峻岭,李彤,高旭,张强,刘迪,葛建华,周传健. 水中浸泡对自修复抗菌复合树脂性能影响的实验研究[J]. 华西口腔医学杂志, 2018, 36(5): 521-527.
[10]	陈德英, 胡格, 周传健, 葛建华, 吴峻岭. 含纳米抗菌无机填料树脂粘接剂的合成及相关性能研究[J]. 华西口腔医学杂志, 2018, 36(1): 46-51.
[11]	王如意, 赵志河, 李宇. 正畸用热压膜材料现状与展望[J]. 华西口腔医学杂志, 2018, 36(1): 87-91.
[12]	胡嘉, 刘鹤, 蔡晴, 邓旭亮. 上颌乳前牙根管形态及根部牙本质力学性能的测定[J]. 华西口腔医学杂志, 2017, 35(4): 394-398.
[13]	吴峻岭,张强,孙睿男,朱婷,葛建华,周传健. 含长链烷基季铵盐纳米抗菌无机填料的复合树脂对人牙菌斑生物膜的影响[J]. 华西口腔医学杂志, 2015, 33(6): 565-569.
[14]	陈智陈彬文. 根管治疗后牙体修复的治疗方案选择[J]. 华西口腔医学杂志, 2015, 33(2): 115-120.
[15]	吴峻岭周凯运朱婷周传健. 含长链烷基季铵盐的纳米抗菌无机填料的合成及其在牙科复合树脂中的应用研究[J]. 华西口腔医学杂志, 2014, 32(5): 513-518.