[1] |
Takaichi A, Suyalatu, Nakamoto T , et al. Microstructures and mechanical properties of Co-29Cr-6Mo alloy fabricated by selective laser melting process for dental applications[J]. J Mech Behav Biomed Mater, 2013,21(3):67-76.
doi: 10.1016/j.jmbbm.2013.01.021
URL
|
[2] |
李国强, 沈晴昳, 高建华 , 等. 选择性激光熔覆钴铬合金与瓷的结合性研究[J]. 实用口腔医学杂志, 2012,28(3):302-305.
doi: 10.3969/j.issn.1001-3733.2012.03.07
URL
|
|
Li GQ, Shen QY, Gao JH , et al. Evaluation of the bond cha-racteristics between porcelain and Co-Cr alloy fabricated by SLM[J]. J Pract Stomatol, 2012,28(3):302-305.
doi: 10.3969/j.issn.1001-3733.2012.03.07
URL
|
[3] |
Xiang N, Xin XZ, Chen J , et al. Metal-ceramic bond strength of Co-Cr alloy fabricated by selective laser melting[J]. J Dent, 2012,40(6):453-457.
doi: 10.1016/j.jdent.2012.02.006
URL
pmid: 22402336
|
[4] |
文志红, 杜传诗, 杜莉 , 等. 金-瓷修复体瓷折裂及剥脱原因分析[J]. 华西口腔医学杂志, 1998,16(1):62-64.
|
|
Wen ZH, Du CS, Du L , et al. Factors analysis on ceramic crack of Metal-Ceramic restorations[J]. West Chin J Sto-matol, 1998,16(1):62-64.
|
[5] |
Ucar Y, Aksahin Z, Kurtoglu C . Metal ceramic bond after multiple castings of base metal alloy[J]. J Prosthet Dent, 2009,102(3):165-171.
doi: 10.1016/S0022-3913(09)60139-6
URL
pmid: 19703623
|
[6] |
Xin XZ, Xiang N, Chen J , et al. In vitro biocompatibility of Co-Cr alloy fabricated by selective laser melting or tra-ditional casting techniques[J]. Mater Lett, 2012,88(1):101-103.
doi: 10.1016/j.matlet.2012.08.032
URL
|
[7] |
Jevremovic D, Puskar T, Kosec B , et al . The analysis of the mechanical properties of F75 Co-Cr alloy for use in selec-tive laser malting manufacturing of removable partial den-ture[J]. Metalurgija, 2012,51(5):67-76.
|
[8] |
Lombardo GH, Nishioka RS, Souza RO , et al. Influence of surface treatment on the shear bond strength of ceramics fused to cobalt-chromium[J]. J Prosthodont, 2010,19(2):103-111.
doi: 10.1111/j.1532-849X.2009.00546.x
URL
pmid: 20040035
|
[9] |
Serra-Prat J, Cano-Batalla J, Cabratosa-Termes J , et al. Adhe-sion of dental porcelain to cast, milled, and laser-sintered cobalt-chromium alloys: shear bond strength and sensitivity to thermocycling[J]. J Prosthet Dent, 2014,112(3):600-605.
doi: 10.1016/j.prosdent.2014.01.004
URL
|
[10] |
Xiang N, Xin XZ, Chen J , et al. Metal-ceramic bond strength of Co-Cr alloy fabricated by selective laser melting[J]. J Dent, 2012,40(6):453-457.
doi: 10.1016/j.jdent.2012.02.006
URL
pmid: 22402336
|
[11] |
Vojdani M, Shaghaghian S, Khaledi A , et al. The effect of thermal and mechanical cycling on bond strength of a cera-mic to nickel-chromium (Ni-Cr) and cobalt-chromium (Co-Cr) alloys[J]. Indian J Dent Res, 2012,23(4):509-513.
doi: 10.4103/0970-9290.104960
URL
|
[12] |
DellaBona A, van Noort R . Shear VS. tensile bond strength of resin composite bonded to ceramic[J]. J Dent Res, 1995,74(9):1591-1596.
doi: 10.1177/00220345950740091401
URL
pmid: 7560421
|
[13] |
de Melo RM, Travassos AC, Neisser MP . Shear bond strengths of a ceramic system to alternative metal alloys[J]. J Prosthet Dent, 2005,93(1):64-69.
doi: 10.1016/j.prosdent.2004.10.017
URL
pmid: 15624000
|
[14] |
Joias RM, Tango RN, Junho de Araujo JE , et al. Shear bond strength of a ceramic to Co-Cr alloys[J]. J Prosthet Dent, 2008,99(1):54-59.
doi: 10.1016/S0022-3913(08)60009-8
URL
|
[15] |
Akova T, Ucar Y, Tukay A , et al. Comparison of the bond strength of laser-sintered and cast base metal dental alloys to porcelain[J]. Dent Mater, 2008,24(10):1400-1404.
doi: 10.1016/j.dental.2008.03.001
URL
pmid: 18417202
|
[16] |
Almilhatti HJ, Giampaolo ET, Vergani CE , et al. Shear bond strength of aesthetic materials bonded to Ni-Cr alloy[J]. J Dent, 2003,31(3):205-211.
doi: 10.1016/S0300-5712(03)00012-5
URL
pmid: 12726705
|
[17] |
Bondioli IR, Bottino MA . Evaluation of shear bond strength at the interface of two porcelains and pure titanium ijected into the casting mold at three different temperatures[J]. J Prosthet Dent, 2005,91(6):541-547.
|
[18] |
杨晖, 潘少明 . 基体表面粗糙度对涂层结合强度的影响[J]. 热加工工艺, 2008,37(15):118-121.
doi: 10.3969/j.issn.1001-3814.2008.15.038
URL
|
|
Yang H, Pan SM . Effect of substrate surface roughness on bond strength of coatings[J]. Hot Working Technol, 2008,37(15):118-121.
doi: 10.3969/j.issn.1001-3814.2008.15.038
URL
|