West China Journal of Stomatology

Previous Articles     Next Articles

Effect of irradiation intensity on dual-cured resin/ceramic bond durability

MENG Xiang-feng1,2, LIU Xiao1, LUO Xiao-ping1, GU Ning2   

  1. 1. Dept. of Prosthodontics, The Affiliated Stomatological Hospital of Nanjing University, Nanjing 210008, China; 2. Jiangsu Key Laboratory for Biomaterials and Devices, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China
  • Received:2010-02-25 Revised:2010-02-25 Online:2010-02-20 Published:2010-02-20
  • Contact: MENG Xiang-feng,Tel:025-83620261

Abstract:

Objective To evaluate the effect of light irradiation intensity on bond durability of dual-cured resin luting agents to silanized ceramics. Methods Linkmax HV(LMHV), Nexus 2(NX2), Variolink Ⅱ HV(VLⅡHV) as dual-cured resin luting agents were bonded to silanized GN-Ⅰ glass ceramics, and irradiated by 800, 310 and 80mW·cm-2 light intensity to form micro-shear test specimens. After 1, 90 d water storage, micro-shear bond strength of silanized resin/ceramic luting agent were measured. Data of each resin luting agent were analyzed by one-way ANOVA. Results 90 d water storage decreased significantly the bond strength of all test groups, and the weak of irradiation intensity did not deteriorate this reduction of bond strength of luting resin/cermaic, oppositely in which LMHV irradiated by 310 mW·cm-2 light intensity and NX2 irradiated by 80 mW·cm-2 showed the higher bond strength than that irradiated by 800 mW·cm-2. Conclusion The weak of irradiation intensity does not affect the bond durability of dual-cured resin luting agents to silanized ceramics.

Key words: dual-cured resin luting agent, ceramics, irradiation intensity, water storage, bond strength