[1] |
杨文丽, 林雪峰, 李相如, 等. 人工楔状缺损牙颈部硬组织应力分布的有限元接触分析[J]. 上海口腔医学, 2012, 21(4):407-411.
|
|
Yang WL, Lin XF, Li XR, et al.Finite element contact stress analysis of simulating teeth with wedge-shaped defects in the cervical region[J]. Shanghai J Stomatol, 2012, 21(4):407-411.
|
[2] |
朱静, 汪黎明, 李国强, 等. 不同材料充填修复下颌第一前磨牙楔状缺损的应力分析[J]. 上海生物医学工程, 2007, 28(4):229-232.
|
|
Zhu J, Wang LM, Li GQ, et al.Three-dimensional finite element stress analysis of first mandibular premolar restored by different materials under loading[J]. Shanghai J Biomed Eng, 2007, 28(4):229-232.
|
[3] |
沈晴昳, 王冬梅, 钟群, 等. 纤维桩复合树脂修复重度楔状缺损前磨牙的三维有限元分析[J]. 中国组织工程研究, 2014,18(30):4777-4782.
|
|
Shen QY, Wang DM, Zhong Q, et al.Three-dimensional finite element analysis of severe wedge-shaped defective premolar restored with fiber post and composite resin[J]. J Clin Rehabil Tissue Eng Res, 2014, 18(30):4777-4782.
|
[4] |
冯丹丹, 祁东, 林雪芬, 等. 不同牙体预备方法对模拟重度楔状缺损牙体桩核冠修复后抗折特性的影响[J]. 华西口腔医学杂志, 2014, 32(2):157-161.
|
|
Feng DD, Qi D, Lin XF, et al.Effects of different tooth pre-parations on the fracture behavior of teeth with severe wedge-shaped defect restored with post and core crowns[J].West Chin J Stomatol, 2014, 32(2):157-161.
|
[5] |
Dejak B, Młotkowski A, Langot C.Three-dimensional finite element analysis of molars with thin-walled prosthetic crowns made of various materials[J]. Dent Mater, 2012, 28(4):433-441.
|
[6] |
王文亚, 傅波, 罗华, 等. 不同桩核冠修复上颌中切牙的三维有限元模型建立及应力分析[J]. 医用生物力学, 2014, 29(1):25-30.
|
|
Wang WY, Fu B, Luo H, et al.Three-dimensional finite ele-ment modeling and stress analysis on different posts and cores for repairing the maxillary central incisors[J]. J Med Biomechanic, 2014, 29(1):25-30.
|
[7] |
胡建, 章非敏, 戴宁, 等. 不同厚度上颌中切牙全瓷冠应力分布的有限元研究[J]. 华西口腔医学杂志, 2012, 30(4):356-359.
|
|
Hu J, Zhang FM, Dai N, et al.Finite element stress analysis of all-ceramic crown of the upper central incisor in differential thickness[J]. West Chin J Stomatol, 2012, 30(4):356-359.
|
[8] |
Guimarães JC, Guimarães Soella G, Brandão Durand L, et al.Stress amplifications in dental non-carious cervical lesions[J]. J Biomech, 2014, 47(2):410-416.
|
[9] |
Borcic J, Anic I, Urek MM, et al.The prevalence of non-carious cervical lesions in permanent dentition[J]. J Oral Rehabil, 2004, 31(2):117-123.
|
[10] |
Murakami N, Wakabayashi N.Finite element contact ana-lysis as a critical technique in dental biomechanics: a review[J]. J Prosthodont Res, 2014, 58(2):92-101.
|
[11] |
Kuroe T, Caputo AA, Ohata N, et al.Biomechanical effects of cervical lesions and restoration on periodontally compro-mised teeth[J]. Quintessence Int, 2001, 32(2):111-118.
|
[12] |
夏荣明, 吴小斌. 不同深度楔状缺损的应力分析[J]. 口腔医学研究, 2005, 21(4):443-444.
|
|
Xia RM, Wu XB.Two-dimensional finite element strain analysis of teeth with different depth of wedge-shaped defects under loading[J]. J Oral Sci Res, 2005, 21(4):443-444.
|
[13] |
Reznikov N, Har-Zion G, Barkana I, et al.Influence of fric-tion resistance on expression of superelastic properties of initial NiTi wires in “reduced friction” and conventional bracket systems[J]. J Dent Biomech, 2010, 25(7):11-17.
|
[14] |
Durmuş G, Oyar P.Effects of post core materials on stress distribution in the restoration of mandibular second pre-molars: a finite element analysis[J]. J Prosthet Dent, 2014, 112(3):547-554.
|
[15] |
Veríssimo C, Simamoto Júnior PC, Soares CJ, et al.Effect of the crown, post, and remaining coronal dentin on the bio-mechanical behavior of endodontically treated maxillary central incisors[J]. J Prosthet Dent, 2014, 111(3):234-246.
|