[1] |
Balasubramaniam GR . Predictability of resin bonded bridges—a systematic review[J]. Br Dent J, 2017,222(11):849-858.
|
[2] |
Wolfart S, Ludwig K, Uphaus A , et al. Fracture strength of all-ceramic posterior inlay-retained fixed partial dentures[J]. Dent Mater, 2007,23(12):1513-1520.
doi: 10.1016/j.dental.2006.12.006
URL
|
[3] |
Castillo-Oyagüe R, Sancho-Esper R, Lynch CD , et al. All-ceramic inlay-retained fixed dental prostheses for replacing posterior missing teeth: a systematic review[J]. J Prosthodont Res, 2018,62(1):10-23.
doi: 10.1016/j.jpor.2017.06.007
URL
|
[4] |
Gumus HS, Polat NT, Yildirim G . Evaluation of fracture resistance of inlay-retained fixed partial dentures fabricated with different monolithic zirconia materials[J]. J Prosthet Dent, 2018,119(6):959-964.
doi: 10.1016/j.prosdent.2017.06.008
URL
|
[5] |
Cekic-Nagas I, Egilmez F, Ergun G , et al. Load-bearing capacity of novel resin-based fixed dental prosjournal materials[J]. Dent Mater J, 2018,37(1):49-58.
doi: 10.4012/dmj.2016-367
URL
|
[6] |
Panah FG, Rezai SM, Ahmadian L . The influence of ceramic surface treatments on the micro-shear bond strength of composite resin to IPS empress 2[J]. J Prosthodont, 2008,17(5):409-414.
doi: 10.1111/jopr.2008.17.issue-5
URL
|
[7] |
Hooshmand T, van Noort R, Keshvad A . Storage effect of a pre-activated silane on the resin to ceramic bond[J]. Dent Mater, 2004,20(7):635-642.
doi: 10.1016/j.dental.2003.08.005
URL
pmid: 15236938
|
[8] |
Özcan M, Bernasconi M . Adhesion to zirconia used for dental restorations: a systematic review and meta-analysis[J]. J Adhes Dent, 2015,17(1):7-26.
|
[9] |
Sailer I, Bonani T, Brodbeck U , et al. Retrospective clinical study of single-retainer cantilever anterior and posterior glass-ceramic resin-bonded fixed dental prostheses at a mean follow-up of 6 years[J]. Int J Prosthodont, 2013,26(5):443-450.
doi: 10.11607/ijp.3368
URL
|
[10] |
Gehrt M, Wolfart S, Rafai N , et al. Clinical results of lithium-disilicate crowns after up to 9 years of service[J]. Clin Oral Investig, 2013,17(1):275-284.
doi: 10.1007/s00784-012-0700-x
URL
pmid: 22392163
|
[11] |
Raigrodski AJ, Hillstead MB, Meng GK , et al. Survival and complications of zirconia-based fixed dental prostheses: a systematic review[J]. J Prosthet Dent, 2012,107(3):170-177.
doi: 10.1016/S0022-3913(12)60051-1
URL
|
[12] |
Lakshmi RD, Abraham A, Sekar V , et al. Influence of connector dimensions on the stress distribution of monolithic zirconia and lithium-di-silicate inlay retained fixed dental prostheses—a 3D finite element analysis[J]. Tanta Dent J, 2015,12(1):56-64.
doi: 10.1016/j.tdj.2015.01.001
URL
|
[13] |
Zhang Y, Sailer I, Lawn BR . Fatigue of dental ceramics[J]. J Dent, 2013,41(12):1135-1147.
doi: 10.1016/j.jdent.2013.10.007
URL
|
[14] |
Cotes C, Arata A, Melo RM , et al. Effects of aging procedures on the topographic surface, structural stability, and mechanical strength of a ZrO2-based dental ceramic[J]. Dent Mater, 2014,30(12):e396-e404.
doi: 10.1016/j.dental.2014.08.380
URL
|
[15] |
Gu XH, Kern M . Marginal discrepancies and leakage of all-ceramic crowns: influence of luting agents and aging conditions[J]. Int J Prosthodont, 2003,16(2):109-116.
doi: 10.1007/s00384-002-0456-x
pmid: 12737239
|
[16] |
Attia A, Kern M . Influence of cyclic loading and luting agents on the fracture load of two all-ceramic crown systems[J]. J Prosthet Dent, 2004,92(6):551-556.
doi: 10.1016/j.prosdent.2004.09.002
URL
|