Factors influencing clinical application of bulk-fill composite resin

doi:10.7518/hxkq.2020.03.001

Abstract

Abstract:

Bulk-fill composite resin are simple to operate, and they reduce polymerization shrinkage and microleakage compare to traditional resin-based composites. However, their clinical application could be affected by numerous factors, such as the material itself, light curing, placement techniques, storage condition, and preheating. This review aimed to summarize the definitions, classifications, indications, clinical properties, and influencing factors of the clinical application of bulk-fill resin-based composites and discuss the ways to improve their clinical effectiveness.

Key words: bulk-fill composite resin, composite resin, light cure, polymerization shrinkage

CLC Number:

R781.05

Xue Jing. Factors influencing clinical application of bulk-fill composite resin[J]. West China Journal of Stomatology, 2020, 38(3): 233-239.

References 50

[1]	Lempel E, Tóth Á, Fábián T , et al. Retrospective evaluation of posterior direct composite restorations: 10-year findings[J]. Dent Mater, 2015,31(2):115-122.
[2]	Borgia E, Baron R, Borgia JL . Quality and survival of direct light-activated composite resin restorations in posterior teeth: a 5- to 20-year retrospective longitudinal study[J]. J Prosthodont, 2019,28(1):e195-e203. doi: 10.1111/jopr.12630 URL
[3]	Abed YA, Sabry HA, Alrobeigy NA . Degree of conversion and surface hardness of bulk-fill composite versus incremental-fill composite[J]. Tanta Dent J, 2015,12(2):71-80. doi: 10.1016/j.tdj.2015.01.003 URL
[4]	Ilie N, Kessler A, Durner J . Influence of various irradiation processes on the mechanical properties and polymerisation kinetics of bulk-fill resin based composites[J]. J Dent, 2013,41(8):695-702. doi: 10.1016/j.jdent.2013.05.008 URL
[5]	Chesterman J, Jowett A, Gallacher A , et al. Bulk-fill resin-based composite restorative materials: a review[J]. Br Dent J, 2017,222(5):337-344. doi: 10.1038/sj.bdj.2017.214 URL
[6]	Ilie N . Impact of light transmittance mode on polymerisation kinetics in bulk-fill resin-based composites[J]. J Dent, 2017,63:51-59. doi: 10.1016/j.jdent.2017.05.017 URL
[7]	Finan L, Palin WM, Moskwa N , et al. The influence of irradiation potential on the degree of conversion and mechanical properties of two bulk-fill flowable RBC base materials[J]. Dent Mater, 2013,29(8):906-912. doi: 10.1016/j.dental.2013.05.008 URL
[8]	Rosatto CM, Bicalho AA, Veríssimo C , et al. Mechanical properties, shrinkage stress, cuspal strain and fracture resistance of molars restored with bulk-fill composites and incremental filling technique[J]. J Dent, 2015,43(12):1519-1528.
[9]	Politi I, McHugh LEJ, Al-Fodeh RS , et al. Modification of the restoration protocol for resin-based composite (RBC) restoratives (conventional and bulk fill) on cuspal movement and microleakage score in molar teeth[J]. Dent Mater, 2018,34(9):1271-1277. doi: 10.1016/j.dental.2018.05.010 URL
[10]	Rengo C, Spagnuolo G, Ametrano G , et al. Marginal leakage of bulk fill composites in Class Ⅱ restorations: a microCT and digital microscope analysis[J]. Int J Adhesion Adhesives, 2015,60:123-129.
[11]	Leprince JG, Palin WM, Vanacker J , et al. Physico-mechanical characteristics of commercially available bulk-fill composites[J]. J Dent, 2014,42(8):993-1000. doi: 10.1016/j.jdent.2014.05.009 URL
[12]	Amirouche-Korichi A, Mouzali M, Watts DC . Effects of monomer ratios and highly radiopaque fillers on degree of conversion and shrinkage-strain of dental resin composites[J]. Dent Mater, 2009,25(11):1411-1418. doi: 10.1016/j.dental.2009.06.009 URL
[13]	Cebe MA, Cebe F, Cengiz MF , et al. Elution of monomer from different bulk fill dental composite resins[J]. Dent Mater, 2015,31(7):e141-e149. doi: 10.1016/j.dental.2015.04.008 URL
[14]	Alshali RZ, Silikas N, Satterthwaite JD . Degree of conversion of bulk-fill compared to conventional resin-composites at two time intervals[J]. Dent Mater, 2013,29(9):e213-e217. doi: 10.1016/j.dental.2013.05.011 URL
[15]	Jang JH, Park SH, Hwang IN . Polymerization shrinkage and depth of cure of bulk-fill resin composites and highly filled flowable resin[J]. Oper Dent, 2015,40(2):172-180.
[16]	El-Damanhoury HM, Platt J . Polymerization shrinkage stress kinetics and related properties of bulk-fill resin composites[J]. Oper Dent, 2014,39(4):374-382.
[17]	Alrahlah A, Silikas N, Watts DC . Post-cure depth of cure of bulk fill dental resin-composites[J]. Dent Mater, 2014,30(2):149-154.
[18]	Schweikl H, Schmalz G . Triethylene glycol dimethacrylate induces large deletions in the hprt gene of V79 cells[J]. Mutat Res, 1999,438(1):71-78.
[19]	Issa Y, Watts DC, Boyd D , et al. Effect of curing light emission spectrum on the nanohardness and elastic modulus of two bulk-fill resin composites[J]. Denta Mater, 2016,32(4):535-550.
[20]	El-Safty S, Silikas N, Watts DC . Creep deformation of restorative resin-composites intended for bulk-fill placement[J]. Dent Mater, 2012,28(8):928-935. doi: 10.1016/j.dental.2012.04.038 URL
[21]	Tekin TH, Kantürk Figen A, Yilmaz Atali P , et al. Full in-vitro analyses of new-generation bulk fill dental composites cured by halogen light[J]. Mater Sci Eng C Mater Biol Appl, 2017,77:436-445. doi: 10.1016/j.msec.2017.03.251 URL
[22]	Alshali RZ, Salim NA, Satterthwaite JD , et al. Long-term sorption and solubility of bulk-fill and conventional resin-composites in water and artificial saliva[J]. J Dent, 2015,43(12):1511-1518.
[23]	Flury S, Hayoz S, Peutzfeldt A , et al. Depth of cure of resin composites: is the ISO 4049 method suitable for bulk fill materials[J]. Dent Mater, 2012,28(5):521-528.
[24]	Lee YK . Influence of filler on the difference between the transmitted and reflected colors of experimental resin composites[J]. Dent Mater, 2008,24(9):1243-1247.
[25]	Li X, Pongprueksa P, Van Meerbeek B , et al. Curing profile of bulk-fill resin-based composites[J]. J Dent, 2015,43(6):664-672.
[26]	Kim RJ, Kim YJ, Choi NS , et al. Polymerization shrinkage, modulus, and shrinkage stress related to tooth-restoration interfacial debonding in bulk-fill composites[J]. J Dent, 2015,43(4):430-439. doi: 10.1016/j.jdent.2015.02.002 URL
[27]	Papadogiannis D, Tolidis K, Gerasimou P , et al. Viscoelastic properties, creep behavior and degree of conversion of bulk fill composite resins[J]. Dent Mater, 2015,31(12):1533-1541. doi: 10.1016/j.dental.2015.09.022 URL
[28]	Barutcigil Ç, Barutcigil K, Özarslan MM , et al. Color of bulk-fill composite resin restorative materials[J]. J Esthet Restor Dent, 2018,30(2):E3-E8.
[29]	Alshali RZ, Salim NA, Sung R , et al. Analysis of long-term monomer elution from bulk-fill and conventional resin-composites using high performance liquid chromatography[J]. Dent Mater, 2015,31(12):1587-1598. doi: 10.1016/j.dental.2015.10.006 URL
[30]	Knežević A, Tarle Z, Meniga A , et al. Degree of conversion and temperature rise during polymerization of composite resin samples with blue diodes[J]. J Oral Rehabili, 2001,28(6):586-591.
[31]	Tarle Z, Attin T, Marovic D , et al. Influence of irradiation time on subsurface degree of conversion and microhardness of high-viscosity bulk-fill resin composites[J]. Clin Oral Investig, 2015,19(4):831-840.
[32]	Zorzin J, Maier E, Harre S , et al. Bulk-fill resin composites: polymerization properties and extended light curing[J]. Dent Mater, 2015,31(3):293-301.
[33]	Shimokawa CAK, Turbino ML, Giannini M , et al. Effect of light curing units on the polymerization of bulk fill resin-based composites[J]. Dent Mater, 2018,34(8):1211-1221. doi: 10.1016/j.dental.2018.05.002 URL
[34]	Daugherty MM, Lien W, Mansell MR , et al. Effect of high-intensity curing lights on the polymerization of bulk-fill composites[J]. Dent Mater, 2018,34(10):1531-1541. doi: 10.1016/j.dental.2018.06.005 URL
[35]	Besegato JF, Jussiani EI, Andrello AC , et al. Effect of light-curing protocols on the mechanical behavior of bulk-fill resin composites[J]. J Mech Behav Biomed Mater, 2019,90:381-387.
[36]	Ilie N, Stark K . Curing behaviour of high-viscosity bulk-fill composites[J]. J Dent, 2014,42(8):977-985.
[37]	Tomaszewska IM, Kearns JO, Ilie N , et al. Bulk fill restoratives: to cap or not to cap—that is the question[J]. J Dent, 2015,43(3):309-316.
[38]	Rothmund L, Reichl FX, Hickel R , et al. Effect of layer thickness on the elution of bulk-fill composite components[J]. Dent Mater, 2017,33(1):54-62. doi: 10.1016/j.dental.2016.10.006 URL
[39]	Habib ANA, Waly GH . The degree of conversion and class Ⅱ cavity microleakage of different bulk fill composites placed with different restorative techniques[J]. Future Dent J, 2018,4(2):231-238. doi: 10.1016/j.fdj.2018.06.003 URL
[40]	Furness A, Tadros MY, Looney SW , et al. Effect of bulk/incremental fill on internal gap formation of bulk-fill composites[J]. J Dent, 2014,42(4):439-449. doi: 10.1016/j.jdent.2014.01.005 URL
[41]	Tsujimoto A, Nagura Y, Barkmeier WW , et al. Simulated cuspal deflection and flexural properties of high viscosity bulk-fill and conventional resin composites[J]. J Mech Behav Biomed Mater, 2018,87:111-118.
[42]	Flury S, Peutzfeldt A, Lussi A . Influence of increment thickness on microhardness and dentin bond strength of bulk fill resin composites[J]. Dent Mater, 2014,30(10):1104-1112. doi: 10.1016/j.dental.2014.07.001 URL
[43]	Borges MG, Soares CJ, Maia TS, et al. Effect of acidic drinks on shade matching, surface topography, mechanical properties of conventional and bulk-fill composite resins[J]. J Prosthet Dent, 2019, 121(5): 868. e1- 868. e8. doi: 10.1016/j.prosdent.2019.02.006 URL
[44]	Eweis AH, Yap AU, Yahya NA . Impact of dietary solvents on flexural properties of bulk-fill composites[J]. Saudi Dent J, 2018,30(3):232-239. doi: 10.1016/j.sdentj.2018.04.002 URL
[45]	Silva PFD, Oliveira LRS, Braga SSL , et al. Effect of selective carious tissue removal on biomechanical behavior of class Ⅱ bulk-fill dental composite restorations[J]. Dent Mater, 2018,34(9):1289-1298. doi: 10.1016/j.dental.2018.05.014 URL
[46]	Barutcigil Ç, Barutcigil K, Özarslan MM , et al. Color stability of novel bulk-fill composites[J]. Dent Mater, 2016,32:e29-e30.
[47]	Villacís IA, Marcelo CC, Rodrigues-Filho LE . Bulk-fill composites: effect of technique and heat-treatment strength[J]. Dent Mater, 2018,34:e126-e127.
[48]	Warmling PG, Wolff FS, Guerra L , et al. Influence of preheating in microhardness of bulk fill composite resins[J]. Dent Mater, 2018,34:e20-e21.
[49]	Tauböck TT, Tarle Z, Marovic D , et al. Pre-heating of high-viscosity bulk-fill resin composites: effects on shrinkage force and monomer conversion[J]. J Dent, 2015,43(11):1358-1364.
[50]	van Dijken JW, Pallesen U . Posterior bulk-filled resin composite restorations: a 5-year randomized controlled clinical study[J]. J Dent, 2016,51:29-35. doi: 10.1016/j.jdent.2016.05.008 URL