Effect of preheating on the properties of resin composite

doi:10.7518/hxkq.2019.06.001

Abstract

CLC Number:

R783.1

Xue Jing, Yang Bina. Effect of preheating on the properties of resin composite[J]. West China Journal of Stomatology, 2019, 37(6): 571-576.

References 51

[1]	González López S, Sanz Chinesta MV, Ceballos García L , et al. Influence of cavity type and size of composite restorations on cuspal flexure[J]. Med Oral Patol Oral Cir Bucal, 2006,11(6):E536-E540. URL pmid: 17072261
[2]	Prasanna N, Pallavi Reddy Y, Kavitha S , et al. Degree of conversion and residual stress of preheated and room-temperature composites[J]. Indian J Dent Res, 2007,18(4):173-176. doi: 10.4103/0970-9290.35827 URL pmid: 17938493
[3]	Lucey S, Lynch CD, Ray NJ , et al. Effect of pre-heating on the viscosity and microhardness of a resin composite[J]. J Oral Rehabil, 2010,37(4):278-282. doi: 10.1111/j.1365-2842.2009.02045.x URL pmid: 20050987
[4]	Deb S, Di Silvio L, Mackler HE , et al. Pre-warming of dental composites[J]. Dent Mater, 2011,27(4):E51-E59. doi: 10.1016/j.dental.2010.11.009 URL
[5]	Cramer NB, Stansbury JW, Bowman CN . Recent advances and developments in composite dental restorative materials[J]. J Dent Res, 2011,90(4):402-416. doi: 10.1177/0022034510381263 URL
[6]	Anseth KS, Newman SM, Bowman CN . Polymeric dental composites: properties and reaction behavior of multimethacrylate dental restorations[M] //Peppas NA, Langer RS. Biopolymers. Heidelberg: Springer, 1995: 177-217.
[7]	Lovell LG, Stansbury JW, Syrpes DC , et al. Effects of composition and reactivity on the reaction kinetics of dimethacrylate/dimethacrylate copolymerizations[J]. Macromol, 1999,32(12):3913-3921. doi: 10.1177/00220345990780081301 URL pmid: 10439035
[8]	Cook WD, Simon GP, Burchill PJ , et al. Curing kinetics and thermal properties of vinyl ester resins[J]. J Appl Polym Sci, 1997,64(4):769-781. doi: 10.1002/(ISSN)1097-4628 URL
[9]	Mundim FM, Garcia Lda F, Cruvinel DR , et al. Color stability, opacity and degree of conversion of pre-heated composites[J]. J Dent, 2011,39(Suppl 1):e25-e29. doi: 10.1016/j.jdent.2010.12.001 URL pmid: 21163324
[10]	Abed Kahnamouei M, Gholizadeh S, Rikhtegaran S , et al. Effect of preheat repetition on color stability of methacrylate-and silorane-based composite resins[J]. J Dent Res Dent Clin Dent Prospects, 2017,11(4):222-228. doi: 10.15171/joddd.2017.039 URL pmid: 29354248
[11]	Cook WD, Beech DR, Tyas MJ . Resin-based restorative materials—a review[J]. Aust Dent J, 1984,29(5):291-295. doi: 10.1111/j.1834-7819.1984.tb05287.x URL pmid: 6398046
[12]	Ferracane JL . Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins[J]. Dent mater, 1985,1(1):11-14. doi: 10.1016/S0109-5641(85)80058-0 URL pmid: 3160625
[13]	Watts DC . Kinetic mechanism of visible-light-cured resins and resin-composites[J]. Trans Acad Dent Mater, 1992,5:80-112.
[14]	Daronch M, Rueggeberg FA, De Goes MF . Monomer conversion of pre-heated composite[J]. J Dent Res, 2005,84(7):663-667. doi: 10.1177/154405910508400716 URL pmid: 15972598
[15]	Nie J, Lindén LA, Rabek JF , et al. A reappraisal of the photopolymerization kinetics of triethyleneglycol dimethacrylate initiated by camphorquinone-N, N-dimethyl-p-toluidine for dental purposes[J]. Acta Polym, 1998,49(4):145-161. doi: 10.1002/(ISSN)1521-4044 URL
[16]	Lovell LG, Lu H, Elliott JE , et al. The effect of cure rate on the mechanical properties of dental resins[J]. Dent Mater, 2001,17(6):504-511. doi: 10.1016/s0109-5641(01)00010-0 URL pmid: 11567688
[17]	Trujillo M, Newman SM, Stansbury JW . Use of near-IR to monitor the influence of external heating on dental composite photopolymerization[J]. Dent Mater, 2004,20(8):766-777. doi: 10.1016/j.dental.2004.02.003 URL
[18]	da Costa J, McPharlin R, Hilton T , et al. Effect of heat on the flow of commercial composites[J]. Am J Dent, 2009,22(2):92-96. URL pmid: 19626972
[19]	Tantbirojn D, Versluis A, Pintado MR , et al. Tooth deformation patterns in molars after composite restoration[J]. Dent Mater, 2004,20(6):535-542. doi: 10.1016/j.dental.2003.05.008 URL
[20]	Peutzfeldt A, Asmussen E . Determinants of in vitro gap formation of resin composites[J]. J Dent, 2004,32(2):109-115. doi: 10.1016/j.jdent.2003.08.008 URL pmid: 14749082
[21]	Blalock JS, Holmes RG, Rueggeberg FA . Effect of temperature on unpolymerized composite resin film thickness[J]. J Prosthet Dent, 2006,96(6):424-432. doi: 10.1016/j.prosdent.2006.09.022 URL pmid: 17174660
[22]	Wagner WC, Asku MN, Neme AL , et al. Effect of pre-heating resin composite on restoration microleakage[J]. Oper Dent, 2008,33(1):72-78. doi: 10.2341/07-41 URL pmid: 18335736
[23]	Bortolotto T, Krejci I . The effect of temperature on hardness of a light-curing composite[J]. J Dent Res, 2003,82(Special IssueA). doi: 10.2147/CCIDE.S130803 URL pmid: 29178744
[24]	Braga RR, Ferracane JL . Contraction stress related to degree of conversion and reaction kinetics[J]. J Dent Res, 2002,81(2):114-118. URL pmid: 11827255
[25]	Lu H, Stansbury JW, Bowman CN . Impact of curing protocol on conversion and shrinkage stress[J]. J Dent Res, 2005,84(9):822-826. doi: 10.1177/154405910508400908 URL pmid: 16109991
[26]	Franz A, Konig F, Anglmayer M , et al. Cytotoxic effects of packable and nonpackable dental composites[J]. Dent Mater, 2003,19(5):382-392. doi: 10.1016/S0109-5641(02)00081-7 URL
[27]	Chen RS, Liuiw CC, Tseng WY , et al. The effect of curing light intensity on the cytotoxicity of a dentin-bonding agent[J]. Oper Dent, 2001,26(5):505-510. URL pmid: 11551016
[28]	St-Georges AJ, Swift EJ Jr, Thompson JY , et al. Curing light intensity effects on wear resistance of two resin composites[J]. Oper Dent, 2002,27(4):410-417. URL pmid: 12120780
[29]	Ferracane JL, Mitchem JC, Condon JR , et al. Wear and marginal breakdown of composites with various degrees of cure[J]. J Dent Res, 1997,76(8):1508-1516. doi: 10.1177/00220345970760081401 URL pmid: 9240388
[30]	Price RB, Derand T, Loney RW , et al. Effect of light source and specimen thickness on the surface hardness of resin composite[J]. Am J Dent, 2002,15(1):47-53. URL pmid: 12074230
[31]	Sobrinho LC, Goes MF, Consani S , et al. Correlation between light intensity and exposure time on the hardness of composite resin[J]. J Mater Sci Mater Med, 2000,11(6):361-364. doi: 10.1023/a:1008981907601 URL pmid: 15348017
[32]	Harris JS, Jacobsen PH ,O’Doherty DM.The effect of curing light intensity and test temperature on the dynamic mechanical properties of two polymer composites[J]. J Oral Rehabil, 1999,26(8):635-639. doi: 10.1046/j.1365-2842.1999.00432.x URL pmid: 10447816
[33]	Asmussen E . Restorative resins: hardness and strength vs. quantity of remaining double bonds[J]. Scand J Oral Sci, 1982,90(6):484-489. doi: 10.1111/j.1600-0722.1982.tb00766.x URL pmid: 6218603
[34]	Ferracane JL, Greener EH . The effect of resin formulation on the degree of conversion and mechanical-properties of dental restorative resins[J]. J Biomed Mater Res, 1986,20(1):121-131. doi: 10.1002/jbm.820200111 URL pmid: 3949822
[35]	Baharav H, Brosh T, Pilo R , et al. Effect of irradiation time on tensile properties of stiffness and strength of composites[J]. J Prosthet Dent, 1997,77(5):471-474. doi: 10.1016/s0022-3913(97)70138-0 URL pmid: 9151265
[36]	Asmussen E . Factors affecting the quantity of remaining double-bonds in restorative resin polymers[J]. Scand J Dent Res, 1982,90(6):490-496. doi: 10.1111/j.1600-0722.1982.tb00767.x URL pmid: 6218604
[37]	Awliya WY . The influence of temperature on the efficacy of polymerization of composite resin[J]. J Contemp Dent Pract, 2007,8(6):9-16. URL pmid: 17846666
[38]	Caneppele T, Torres C, Borges A , et al. Influence of pre-cure temperature on Vickers microhardness of resin composite[J]. Int J Contemp Dent, 2011,2(3):41-45.
[39]	Bagis YH, Rueggeberg FA . Effect of post-cure temperature and heat duration on monomer conversion of photo-activated dental resin composite[J]. Dent Mater, 1997,13(4):228-232. doi: 10.1016/S0109-5641(97)80033-4 URL pmid: 11696901
[40]	Daronch M, Rueggeberg FA, De Goes MF , et al. Polymerization kinetics of pre-heated composite[J]. J Dent Res, 2006,85(1):38-43. doi: 10.1177/154405910608500106 URL pmid: 16373678
[41]	Heintze SD, Zellweger G, Cavalleri A , et al. Influence of the antagonist material on the wear of different composites using two different wear simulation methods[J]. Dent Mater, 2006,22(2):166-175. doi: 10.1016/j.dental.2005.04.012 URL
[42]	Mesquita RV, Geis-Gerstorfer J . Influence of temperature on the visco-elastic properties of direct and indirect dental composite resins[J]. Dent Mater, 2008,24(5):623-632. doi: 10.1016/j.dental.2007.06.025 URL
[43]	Freedman G, Krejci I . Warming up to composites[J]. Compend Contin Educ Dent, 2004,25(5):371-378. URL pmid: 15181778
[44]	Peutzfeldt A . Investigations on polymer structure of dental resinous materials[J]. Trans Acad Dent Mater, 2004,18:81-104. doi: 10.1034/j.1600-0722.2002.21326.x URL pmid: 12507221
[45]	Fróes-Salgado NR, Silva LM, Kawano Y , et al. Composite pre-heating: effects on marginal adaptation, degree of conversion and mechanical properties[J]. Dent Mater, 2010,26(9):908-914. doi: 10.1016/j.dental.2010.03.023 URL
[46]	Daronch M, Rueggeberg FA, Moss L , et al. Clinically relevant issues related to preheating composites[J]. J Esthet Restor Dent, 2006,18(6):340-350. doi: 10.1111/j.1708-8240.2006.00046.x URL pmid: 17083439
[47]	Zach L, Cohen G . Pulp response to externally applied heat[J]. Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 1965,19(4):515-530. doi: 10.1016/j.tripleo.2011.02.022 URL pmid: 21546284
[48]	Rueggeberg FA, Daronch M, Browning WD , et al. In vivo temperature measurement of pre-heated resin composite[J]. J Dent Res, 2005,84(Special Issue A). doi: 10.1016/j.dental.2006.11.024 URL pmid: 17197016
[49]	Cobb DS, Dederich DN, Gardner TV . In vitro temperature change at the dentin/pulpal interface by using conventional visible light versus argon laser[J]. Lasers Surg Med, 2000,26(4):386-397. doi: 10.1002/(sici)1096-9101(2000)26:4&lt;386::aid-lsm7&gt;3.0.co;2-c URL pmid: 10805944
[50]	Bouillaguet S, Caillot G, Forchelet J , et al. Thermal risks from LED- and high-intensity QTH-curing units during polymerization of dental resins[J]. J Biomed Mater Res B Appl Biomat, 2005,72(2):260-267. doi: 10.1002/jbm.b.30143 URL pmid: 15455367
[51]	Daronch M, Rueggeberg FA, Hall G , et al. Effect of composite temperature on in vitro intrapulpal temperature rise[J]. Dent Mater, 2007,23(10):1283-1288. doi: 10.1016/j.dental.2006.11.024 URL

Effect of preheating on the properties of resin composite

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References 51

Related Articles 10

Recommended Articles

Metrics

Comments

[1]	Zhang Junjing, Zhang Yuqiang, Fan Lin, Yu Haiyang.. Digital technology for fluid resin injection to close anterior diastema after orthodontic treatment [J]. West China Journal of Stomatology, 2023, 41(1): 114-122.
[2]	Yu Chen,Mianxiang Li,Ying Zhang. Effect analysis of ceramic onlay to repair serious dental defects in young permanent molars [J]. West China Journal of Stomatology, 2019, 37(3): 299-303.
[3]	Junling Wu,Tong Li,Xu Gao,Qiang Zhang,Di Liu,Jianhua Ge,Chuanjian Zhou. Effect of water immersion on a dental self-healing and antibacterial resin composite [J]. West China Journal of Stomatology, 2018, 36(5): 521-527.
[4]	Wu Junling, Zhang Qiang, Sun Ruinan, Zhu Ting, Ge Jianhua, Zhou Chuanjian. Dental plaque microcosm biofilm behavior on a resin composite incorporated with nano-antibacterial inorganic filler containing long-chain alkyl quaternary ammonium salt [J]. West China Journal of Stomatology, 2015, 33(6): 565-569.
[5]	Wu Junling, Zhou Kaiyun, Zhu Ting, Zhou Chuanjian.. Synthesis of a nano-antibacterial inorganic filler containing a quaternary ammonium salt with long chain alkyl and its effect on dental resin composites [J]. West China Journal of Stomatology, 2014, 32(5): 513-518.
[6]	Wei Yan, Gao Yuan, Lü Jin, Wang Bin, Liu Jinsong. Strengthening a dental gypsum model by infiltration of cyanoacrylate [J]. West China Journal of Stomatology, 2014, 32(3): 229-232.
[7]	Fan Xusheng1, Li Zhihua2, Shi Hui2, Liu Xiang2. Mechanical properties of thermodynamic nickel-titanium archwires in a simulated oral environment in vitro [J]. West China Journal of Stomatology, 2012, 30(2): 217-220.
[8]	Gao Yan1，2, Zhang Fuqiang1，2, Gao Jianhua3. Mechanical property of tooth-like yttria-stabilized tetragonal zirconia polycrystal by adding rare earth oxide [J]. West China Journal of Stomatology, 2012, 30(1): 73-76.
[9]	HUANG Hui1, WEI Bin1, ZHANG Fuqiang1, SUN Jing2, GAO Lian2. Effect of two- step sinter ing method on proper ties of zir conia cer amic [J]. West China Journal of Stomatology, 2008, 26(02): 175-178.
[10]	GU Xiao- yu1, HU Xiao- gang2, PENG Dong1, WANG Xin - zhi1. Resear ch of changes in the mechanical proper ties and cur ability of composite cor e mater ials modified with ultr afine diamond [J]. West China Journal of Stomatology, 2007, 25(06): 525-528.