Research progress on 3D printing metal powders used in cranio-maxillofacial prosthesis

doi:10.7518/hxkq.2019.04.019

Abstract

Abstract:

With the rapid development of 3D printing, it is widely used in the field of cranio-maxillofacial surgery. Through the individualized production of 3D printing, the backward mode of traditional production relying on manual shaping has been changed to meet the needs of different patients. However, as no clear specification exists for the performance requirements of 3D printing metal powder for cranio-maxillofacial surgery, its long-term development is not feasible. In this paper, the preparation technologies of 3D printing metal powder for cranio-maxillofacial prostheses (i.e., gas atomization, rotating electrode atomization, and radio frequency plasma spheroidization) and 3D printing forming technologies (i.e., selective laser melting, electron beam selective melting, and laser-engineered net shaping) are introduced. The performance requirements of 3D printing metal powder for cranio-maxillofacial prostheses are then summarized according to the characteristics of the preparation and forming technologies described.

Key words: 3D printing, cranio-maxillofacial prosthesis, metal powder, performance characteristics

CLC Number:

R783.2

Shuo Pan,Bin Liu. Research progress on 3D printing metal powders used in cranio-maxillofacial prosthesis[J]. West China Journal of Stomatology, 2019, 37(4): 438-442.

References 27

[1]	胡洪成, 卢松鹤 . 3D打印技术在口腔医学应用的国内外现状和趋势[J]. 中国医疗器械信息, 2017,23(3):6-10, 21.
	Hu HC, Lu SH . The current situation and prospects of 3D printing technology in stomatology at home and abroad[J]. China Med Dev Inform, 2017,23(3):6-10, 21.
[2]	张海荣, 鱼泳 . 3D打印技术在医学领域的应用[J]. 医疗卫生装备, 2015,36(3):118-120.
	Zhang HR, Yu Y . Application of 3D printing technology in medicine[J]. Chin Med Equip J, 2015,36(3):118-120.
[3]	刘屹环, 黎海雄 . 3D打印技术在齿科行业的应用[J]. 新材料产业, 2017(11):35-39.
	Liu YH, Li HX . Application of 3D printing technology in the dental industry[J]. Adv Mater Ind, 2017(11):35-39.
[4]	Shibli JA, Mangano C , D’Avila S, et al. Influence of direct laser fabrication implant topography on type Ⅳ bone: a histomorphometricstudy in humans[J]. J Biomed Mater Res Part A, 2010,93(2):607-614.
[5]	Nickels L . World’s first patient-specific jaw implant[J]. Metal Powder Report, 2012,67(2):12-14.
[6]	Mangano FG, Franco MD, Caprioglio A , et al. Immediate, non-submerged, root-analogue direct laser metal sintering (DLMS) implants: a 1-year prospective study on 15 patients[J]. Laser Med Sci, 2014,29(4):1321-1328.
[7]	吴文恒, 吴凯琦, 肖逸凡 , 等. 气雾化压力对3D打印用316L不锈钢粉末性能的影响[J]. 粉末冶金技术, 2017,35(2):83-88.
	Wu WH, Wu KQ, Xiao YF , et al. Effect of atomization pressure on the properties of 316L stainless steel powders used in 3D printing[J]. Powder Metall Technol, 2017,35(2):83-88.
[8]	罗浩, 宗伟, 李志 , 等. 气雾化法制备3D打印用钴铬合金粉末工艺的研究[J]. 材料研究与应用, 2017,11(3):182-186, 191.
	Luo H, Zong W, Li Z , et al. Study on the preparation process of 3D printing CoCr alloy powder by gas atomization method[J]. Mater Res Appl, 2017,11(3):182-186, 191.
[9]	陆亮亮, 刘雪峰, 张少明 , 等. 高频感应熔化金属丝气雾化制备球形钛粉[J]. 材料导报, 2018,32(8):1267-1270, 1288.
	Lu LL, Liu XF, Zhang SM , et al. A combinatorial technique incorporating high frequency inductive heating and gas atomization for preparing spherical titanium powders from titanium wires[J]. Mater Rev, 2018,32(8):1267-1270, 1288.
[10]	Chang I, Zha YY . Advances in powder metallurgy: properties, processing and applications[M]. Amsterdam: Elsevier, 2013.
[11]	Schwenck D, Ellendt N, Fischer-Bühner J , et al. A novel convergent—divergent annular nozzle design for close-coupled atomisation[J]. Powder Metal, 2017,60(3):198-207.
[12]	戴煜, 李礼 . 等离子旋转雾化制备航空用3D打印金属粉体材料研究[J]. 新材料产业, 2016(8):57-63.
	Dai Y, Li L . Preparation of airborne 3D-printed metallic powders by plasma rotational atomization[J]. Adv Mater Ind, 2016(8):57-63.
[13]	陈焕铭, 胡本芙, 李慧英 , 等. 等离子旋转电极雾化FGH95高温合金粉末颗粒凝固组织特征[J]. 金属学报, 2003,39(1):30-34.
	Chen HM, Hu BF, Li HY , et al. Microstructure characteristics of FGH95 superalloy powders prepared by prep[J]. Acta Metallurgica Sinica, 2003,39(1):30-34.
[14]	Hsu TI, Wei CM, Wu LD , et al. Nitinol powders generate from Plasma Rotation Electrode Process provide clean powder for biomedical devices used with suitable size, spheroid surface and pure composition[J]. Sci Rep, 2018,8(1):13776.
[15]	王建军 . 射频等离子体制备球形粉末及数值模拟的研究[D]. 北京: 北京科技大学, 2015.
	Wang JJ . Research on preparation of spherical powder by radio frequency plasma and numerical simulation[D]. Beijing: University of Science and Technology Beijing, 2015.
[16]	古忠涛, 叶高英, 金玉萍 , 等. 射频感应等离子体制备球形钛粉的成分分析[J]. 强激光与粒子束, 2012,24(6):1409-1413.
	Gu ZT, Ye GY, Jin YP , et al. Chemical compositions of spherical titanium powders prepared by RF induction plasma[J]. High Power Laser Part Beams, 2012,24(6):1409-1413.
[17]	盛艳伟, 郭志猛, 郝俊杰 , 等. 射频等离子体制备球形钛粉[J]. 稀有金属材料与工程, 2013,42(6):1291-1294.
	Sheng YW, Guo ZM, Hao JJ , et al. Preparation of micro-spherical titanium powder by RF plasma[J]. Rare Metal Mater Eng, 2013,42(6):1291-1294.
[18]	Yang SS, Gwak JN, Lim TS , et al. Preparation of spherical titanium powders from polygonal titanium hydride powders by radio frequency plasma treatment[J]. Mater Trans, 2013,54(12):2313-2316.
[19]	Ghorui S, Sahasrabudhe S, Dhamale G , et al. Characteristics of synthesized alumina nanoparticles in a high-pressure radio frequency thermal plasma reactor[J]. IEEE Trans Plasma Sci, 2014,42(3):759-766.
[20]	American Society for Testing and Materials. ASTM F2792-10e1 standard terminology for additive manufacturing technologies[S]. Philadelphia: American Society for Testing and Materials, 2012.
[21]	Harun WS, Kamariah MS, Muhamad N , et al. A review of powder additive manufacturing processes for metallic biomaterials[J]. Powder Technol, 2018,327:128-151.
[22]	颉芳霞, 何雪明, 吕彦明 , 等. 生物医用多孔钛及钛合金激光快速成形研究进展[J]. 材料导报, 2016,30(7):109-114.
	Xie FX, He XM, Lü YM , et al. Research progress in laser rapid forming of porous titanium and its alloys for biomedical applications[J]. Mater Rev, 2016,30(7):109-114.
[23]	Chen CH, Lee MY, Shyu VB , et al. Surface modification of polycaprolactone scaffolds fabricated via selective laser sintering for cartilage tissue engineering[J]. Mater Sci Eng C Mater Biol Appl, 2014,40:389-397.
[24]	汤慧萍, 王建, 逯圣路 , 等. 电子束选区熔化成形技术研究进展[J]. 中国材料进展, 2015,34(3):225-235.
	Tang HP, Wang J, Lu SL , et al. Research progress in selective electron beam melting[J]. Mater China, 2015,34(3):225-235.
[25]	American Society for Testing and Materials. ASTM B348-08a Standard specification for titanium and titanium alloy bars and billets[S]. Philadelphia: American Society for Testing and Materials, 2013.
[26]	高超峰, 余伟泳, 朱权利 , 等. 3D打印用金属粉末的性能特征及研究进展[J]. 粉末冶金工业, 2017,27(5):53-58.
	Gao CF, Yu WY, Zhu QL , et al. Performance characteristics and research progress of metal powders for 3D printing[J]. Powder Metall Ind, 2017,27(5):53-58.
[27]	Simchi A, Petzoldt F, Pohl H . On the development of direct metal laser sintering for rapid tooling[J]. J Mater Process Technol, 2003,141(3):319-328.