[1] |
胡洪成, 卢松鹤 . 3D打印技术在口腔医学应用的国内外现状和趋势[J]. 中国医疗器械信息, 2017,23(3):6-10, 21.
|
|
Hu HC, Lu SH . The current situation and prospects of 3D printing technology in stomatology at home and abroad[J]. China Med Dev Inform, 2017,23(3):6-10, 21.
|
[2] |
张海荣, 鱼泳 . 3D打印技术在医学领域的应用[J]. 医疗卫生装备, 2015,36(3):118-120.
|
|
Zhang HR, Yu Y . Application of 3D printing technology in medicine[J]. Chin Med Equip J, 2015,36(3):118-120.
|
[3] |
刘屹环, 黎海雄 . 3D打印技术在齿科行业的应用[J]. 新材料产业, 2017(11):35-39.
|
|
Liu YH, Li HX . Application of 3D printing technology in the dental industry[J]. Adv Mater Ind, 2017(11):35-39.
|
[4] |
Shibli JA, Mangano C , D’Avila S, et al. Influence of direct laser fabrication implant topography on type Ⅳ bone: a histomorphometricstudy in humans[J]. J Biomed Mater Res Part A, 2010,93(2):607-614.
|
[5] |
Nickels L . World’s first patient-specific jaw implant[J]. Metal Powder Report, 2012,67(2):12-14.
|
[6] |
Mangano FG, Franco MD, Caprioglio A , et al. Immediate, non-submerged, root-analogue direct laser metal sintering (DLMS) implants: a 1-year prospective study on 15 patients[J]. Laser Med Sci, 2014,29(4):1321-1328.
|
[7] |
吴文恒, 吴凯琦, 肖逸凡 , 等. 气雾化压力对3D打印用316L不锈钢粉末性能的影响[J]. 粉末冶金技术, 2017,35(2):83-88.
|
|
Wu WH, Wu KQ, Xiao YF , et al. Effect of atomization pressure on the properties of 316L stainless steel powders used in 3D printing[J]. Powder Metall Technol, 2017,35(2):83-88.
|
[8] |
罗浩, 宗伟, 李志 , 等. 气雾化法制备3D打印用钴铬合金粉末工艺的研究[J]. 材料研究与应用, 2017,11(3):182-186, 191.
|
|
Luo H, Zong W, Li Z , et al. Study on the preparation process of 3D printing CoCr alloy powder by gas atomization method[J]. Mater Res Appl, 2017,11(3):182-186, 191.
|
[9] |
陆亮亮, 刘雪峰, 张少明 , 等. 高频感应熔化金属丝气雾化制备球形钛粉[J]. 材料导报, 2018,32(8):1267-1270, 1288.
|
|
Lu LL, Liu XF, Zhang SM , et al. A combinatorial technique incorporating high frequency inductive heating and gas atomization for preparing spherical titanium powders from titanium wires[J]. Mater Rev, 2018,32(8):1267-1270, 1288.
|
[10] |
Chang I, Zha YY . Advances in powder metallurgy: properties, processing and applications[M]. Amsterdam: Elsevier, 2013.
|
[11] |
Schwenck D, Ellendt N, Fischer-Bühner J , et al. A novel convergent—divergent annular nozzle design for close-coupled atomisation[J]. Powder Metal, 2017,60(3):198-207.
|
[12] |
戴煜, 李礼 . 等离子旋转雾化制备航空用3D打印金属粉体材料研究[J]. 新材料产业, 2016(8):57-63.
|
|
Dai Y, Li L . Preparation of airborne 3D-printed metallic powders by plasma rotational atomization[J]. Adv Mater Ind, 2016(8):57-63.
|
[13] |
陈焕铭, 胡本芙, 李慧英 , 等. 等离子旋转电极雾化FGH95高温合金粉末颗粒凝固组织特征[J]. 金属学报, 2003,39(1):30-34.
|
|
Chen HM, Hu BF, Li HY , et al. Microstructure characteristics of FGH95 superalloy powders prepared by prep[J]. Acta Metallurgica Sinica, 2003,39(1):30-34.
|
[14] |
Hsu TI, Wei CM, Wu LD , et al. Nitinol powders generate from Plasma Rotation Electrode Process provide clean powder for biomedical devices used with suitable size, spheroid surface and pure composition[J]. Sci Rep, 2018,8(1):13776.
|
[15] |
王建军 . 射频等离子体制备球形粉末及数值模拟的研究[D]. 北京: 北京科技大学, 2015.
|
|
Wang JJ . Research on preparation of spherical powder by radio frequency plasma and numerical simulation[D]. Beijing: University of Science and Technology Beijing, 2015.
|
[16] |
古忠涛, 叶高英, 金玉萍 , 等. 射频感应等离子体制备球形钛粉的成分分析[J]. 强激光与粒子束, 2012,24(6):1409-1413.
|
|
Gu ZT, Ye GY, Jin YP , et al. Chemical compositions of spherical titanium powders prepared by RF induction plasma[J]. High Power Laser Part Beams, 2012,24(6):1409-1413.
|
[17] |
盛艳伟, 郭志猛, 郝俊杰 , 等. 射频等离子体制备球形钛粉[J]. 稀有金属材料与工程, 2013,42(6):1291-1294.
|
|
Sheng YW, Guo ZM, Hao JJ , et al. Preparation of micro-spherical titanium powder by RF plasma[J]. Rare Metal Mater Eng, 2013,42(6):1291-1294.
|
[18] |
Yang SS, Gwak JN, Lim TS , et al. Preparation of spherical titanium powders from polygonal titanium hydride powders by radio frequency plasma treatment[J]. Mater Trans, 2013,54(12):2313-2316.
|
[19] |
Ghorui S, Sahasrabudhe S, Dhamale G , et al. Characteristics of synthesized alumina nanoparticles in a high-pressure radio frequency thermal plasma reactor[J]. IEEE Trans Plasma Sci, 2014,42(3):759-766.
|
[20] |
American Society for Testing and Materials. ASTM F2792-10e1 standard terminology for additive manufacturing technologies[S]. Philadelphia: American Society for Testing and Materials, 2012.
|
[21] |
Harun WS, Kamariah MS, Muhamad N , et al. A review of powder additive manufacturing processes for metallic biomaterials[J]. Powder Technol, 2018,327:128-151.
|
[22] |
颉芳霞, 何雪明, 吕彦明 , 等. 生物医用多孔钛及钛合金激光快速成形研究进展[J]. 材料导报, 2016,30(7):109-114.
|
|
Xie FX, He XM, Lü YM , et al. Research progress in laser rapid forming of porous titanium and its alloys for biomedical applications[J]. Mater Rev, 2016,30(7):109-114.
|
[23] |
Chen CH, Lee MY, Shyu VB , et al. Surface modification of polycaprolactone scaffolds fabricated via selective laser sintering for cartilage tissue engineering[J]. Mater Sci Eng C Mater Biol Appl, 2014,40:389-397.
|
[24] |
汤慧萍, 王建, 逯圣路 , 等. 电子束选区熔化成形技术研究进展[J]. 中国材料进展, 2015,34(3):225-235.
|
|
Tang HP, Wang J, Lu SL , et al. Research progress in selective electron beam melting[J]. Mater China, 2015,34(3):225-235.
|
[25] |
American Society for Testing and Materials. ASTM B348-08a Standard specification for titanium and titanium alloy bars and billets[S]. Philadelphia: American Society for Testing and Materials, 2013.
|
[26] |
高超峰, 余伟泳, 朱权利 , 等. 3D打印用金属粉末的性能特征及研究进展[J]. 粉末冶金工业, 2017,27(5):53-58.
|
|
Gao CF, Yu WY, Zhu QL , et al. Performance characteristics and research progress of metal powders for 3D printing[J]. Powder Metall Ind, 2017,27(5):53-58.
|
[27] |
Simchi A, Petzoldt F, Pohl H . On the development of direct metal laser sintering for rapid tooling[J]. J Mater Process Technol, 2003,141(3):319-328.
|